美国omega DP2000-S1应变/毫伏仪表指示器控制器
应变/毫伏仪表指示器控制器 1/8 Din DP2000-S Series 5年保修 CE 应变/毫伏仪表指示器控制器 1/8 Din DP2000-S Series:应变/毫伏仪表指示器控制器<br>1/8 Din DP2000-S3 Adjustable 1 to 10 Vdc Bridge Excitation Supply ±1999 or ±9999 Count Display Span Seven Overlapping Gain Ranges Front-Panel Accessible Zero and Span Adjustments Resolution Down to 1 or 2 μV/Count Strain-Gauge Sensitivity Down to 0.20 mV/V Ratiometric Measurement 1 or 0.2 mV/Count Analog Output LED or LCD Display Automatic Polarity Display Hold and Test Screw-Terminal Barrier Strip The DP2000/9000-S is a meter/controller for use with pressure transducers and load cells which require bridge excitation and preamplification of microvolt signals. Deadload and tare adjustments make it suitable for weighing applications. Like process meters, it provides zero and span adjustments for direct readout in engineering units. It can also be used as a microvoltmeter with differential input. A universal 1/8 DIN case houses each meter. Choose any combination of display type (LED or LCD), operating power, input type and range, analog output, and digital or control outputs. Excitation Supply and Preamplifier The DP2000/9000-S provides a constant-voltage excitation supply, which is adjustable from 1 to 10V and can drive up to 30 mA. It also provides a high-impedance preamplifier, which is continuously adjustable so that signal levels from ±2.0 to ±500 mV can produce the fullscale display of ±1999 or ±9999 counts. At 10V excitation and maximum gain, full-scale readout can be obtained with strain-gauge sensitivity as low as 0.20 mV/V. An active filter is provided for noise reduction. Bridge Connection Bridges can be connected by 4 or 6 wires. In 6-wire connection, two lines sense the voltage applied to the bridge and compensate for lead resistance. Resolution and Accuracy Resolution for DP2000-S is one part in ±1999 counts, or 0.05% of full scale. Resolution for DP9000-S is one part in ±9999 counts, or 0.01% of full scale. Accuracy is 99.9% of reading. The measurement is ratiometric to reduce errors due to temperature and power-line variations. The same internal reference controls the meter gain and the excitation level. SPECIFICATIONS Gain Adjustment: Seven overlapping ranges with fine adjustment Input Configuration: Differential, ratiometric Zero Adjustment: ±225 μV/volt of excitation Span Adjustment: 1 to 2.47 of preamp gain Bias Current: 11 nA typ, 22 nA max Noise Rejection CMR, SIG GND to SIG LO: 80 dB, DC to 60 Hz CMV, SIG GND to SIG LO: ±1 V, DC to 60 Hz CMR, SIG GND to PWR GND: 120 dB CMV, SIG GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing Accuracy at 25 °C Error, Maximum ±0.05% of reading ±1 count (DP2); ±0.05% of reading ±2 counts (DP9) Span Tempco: ±0.01% of reading/ °C Zero Drift, Maximum: ±0.3 μV/ °C Offset Drift, Maximum: ±(0.01% offset V ±0.01% FS V)/ °C Step Response: 1 s to 99.9% of span Warmup to Rated Accuracy: 30 min (DP2); 60 min (DP9) Excitation Configuration: Constant-voltage Voltage Sense: Internal or remote Voltage Range: Adjustable from 1 to 10V Load Current, Maximum: 30 mA Conversion Technique: Auto-zero, dual slope, average value Signal Integration Period: 100 ms, nominal Reading Rate: 2.5/s, nominal Display LED: Red, 14.2 mm (0.56"), 7-segment LCD: 12.7 mm (0.50"), 7-segment Power AC Models: 120, 240 or 24 Vac +10%/-15%, 49 to 440 Hz DC Models: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp; 5 Vdc ±5%, non-isolated Common Mode Rejection: 120 dB Environmental Operating Temperature: 0 to 60 °C (32 to 140°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Humidity: 95% RH, non-condensing @ 40°C (104°F) Mechanical Bezel: 96 W x 48 H x 8 mm D (3.78 x 1.89 x 0.31") Depth Behind Bezel: 139.8 mm (5.50") Panel Cutout: 92 W x 45 mm H (3.62 x 1.77") Weight: 17 oz (480 g) Case Material: 94V-0 UL-rated polycarbonate
产品型号说明 (1) (2) (3) (4) (5) (6) DP - 选项描述 (1) Display Resolution and Case Style 选择 2 代表 ±1999 counts (3 1/2 digits) 9 代表 ±9999 counts (4 digits) (2) Display & Power Options 选择 0 代表 LED 120 Vac (49/440 Hz) (BQ20 or BQ90) 1 代表 LCD 120 Vac (49/440 Hz) (BQ21) 2 代表 LED 240 Vac (49/440 Hz) (BQ22 or BQ92) 3 代表 LCD 240 Vac (49/440 Hz) (BQ23) 4 代表 LED 9-32 Vdc (isolated) (BQ24 or BQ94) 5 代表 LCD 9-32 Vdc (isolated) (BQ25) 6 代表 LED 5 Vdc** (BQ26 or BQ96) 7 代表 LCD 5 Vdc** (BQ27) 8 代表 LED 24 Vac (BQ28 or BQ98) 9 代表 LCD 24 Vac (BQ29) A 代表 LED 26-56 Vdc (isolated) (BQ2A or BQ9A) B 代表 LCD 26-56 Vdc (isolated) (BQ2B) (3) Analog Outputs 选择 0 代表 1mV/count (DP2) or 0.2mV/count (DP9) analog output non-isolated. (standard) 1 代表 0-5 Vdc non-isolated (BA01) 2 代表 0-10 Vdc non-isolated (BA01) 3 代表 0-1 mA source or sink non-isolated (BA01) 4 代表 4-20 mA source or sink non-isolated (BA01) 5 代表 4-20 mA sink (high-compliance) non-isolated. (BA02) 6 代表 4-20 mA ISOLATED (BA03) (4) Control Outputs 选择 0 代表 None 1 代表 Dual-setpoint 10 A relay. (BDT1) 2 代表 Proportional 4-20 mA control source or sink (BDP1) 3 代表 Time-proportional solid-state 2 A relay plus proportional 4-20 mA control source or sink. (BDP2) 4 代表 BCD (isolated latched buffered byte addressable). Includes 50-pin mass-termination connector. (BDD2) 5 代表 Single-setpoint 10 A relay (BDS1) (5) Input Type and Range 选择 S1 代表 Strain-gage/microvolt input plus excitation 499 mV S2 代表 Strain-gage/microvolt input plus excitation 249 mV S3 代表 Strain-gage/microvolt input plus excitation 124 mV S4 代表 Strain-gage/microvolt input plus excitation 62.5 mV S5 代表 Strain-gage/microvolt input plus excitation 31.2 mV S6 代表 Strain-gage/microvolt input plus excitation 15.6 mV S7 代表 Strain-gage/microvolt input plus excitation 7.8 mV (6) Display Color 选择 Nothing(leave field blank) 代表 for Red Display (standard) -G 代表 Green Display
粤公网安备 44030402001379号
