FPB152流量传感器 美国omega
叶轮流量传感器 FPB100 Series 叶轮流量传感器 4 to 20 mA and Programmable Switch/Pulse Divider Output Low Flow Capabilities from 0.1m/s (0.3 ft/s) Polypropylene or PVDF Material Installs into Pipe Sizes DN 15 to DN 200 (0.5 to 8") Built-In User Interface for On-Site Configuration Low Power and High Resolution
The OMEGA? FPB100 Series flow sensor is the next generation in fluid measurement technology. This new sensor is an improvement on what is already an industry standard. It has the added functionality of various output options including flow switch, multi-functional pulse divider or 4 to 20 mA. Additionally, it offers low flow, low power and high resolution and can be configured onsite directly through the built-in user interface. Installation is simple because the OMEGA FPB100 Series utilizes the same fittings as the popular OMEGA FP5000 and FP8500 Series paddlewheel sensors and fits into pipe sizes ranging from DN15 to DN200 (0.5 to 8"). Available in polypropylene and PVDF, it is ideal for a variety of applications including chemical processing, water and wastewater monitoring and scrubber control. SPECIFICATIONS General Input Frequency Range: 1 to 1000 Hz Operating Range: 0.1 m/s to 6 m/s (0.3 ft/s to 20 ft/s) Linearity: ±1% of max range at 25°C (77°F) Repeatability: ±0.5% of max range at 25°C (77°F) System Response: 100 ms update rate nominal Wetted Materials Sensor Body: Polypropylene or PVDF (depending on model) O-Ring: FPM Rotor Pin: Titanium: Polypropylene models PVDF: PVDF models Rotor: Black PVDF: Polypropylene models Natural PVDF: PVDF models Electrical Pulse, Flow Switch Dry-Contact Relay: 24 Vdc nominal (21.6 Vdc min to 26.4 Vdc max) 30 mA max current Solid-State Relay: 5 to 24 Vdc nominal (5.0 Vdc min to 26.4 Vdc max) 30 mA max current 4 to 20 mA: 12 Vdc to 32 Vdc nominal (10.8 Vdc min to 35.2 Vdc max) 21 mA max current Reverse Polarity and Short Circuit Protection: Up to 40V, 1 hour Over-Voltage Protection: >40 Vdc over 1 hour OUTPUT SPECIFICATIONS Signal Averaging: Programmable 0 to 100 seconds Sensitivity Response: Programmable 0 to 9 scale PULSE DIVIDER/TOTAL PULSE OUTPUT Pulse Divider Setting: 1.0000 to 99999 Maximum Pulse Rate: 300 Hz Maximum Pulse Width: 50 ms FLOW SWITCH OUTPUT Relay Modes: Low, high Time Delay: 0.0 to 6400.0 seconds Hysteresis: Adjustable in engineering units Relay Specifications Mechanical SPDT: 5 A at 30 Vdc, 5 A @ 250 Vac Solid-State Relay: 100 mA at 40 Vdc, 70 mA @ 33 Vac Current Output (Passive 4 to 20 mA) Loop Accuracy: ±32 μA (at 25°C at 24 Vdc) Loop Resolution: 5 μA Temp. Drift: ±1 μA per °C max Power Supply Rejection: ±1 μA per V Max Cable: 300 m (1000') Maximum Loop Resistance: 600 Ω @ 24 Vdc 1kΩ @ 32 Vdc Max Temperature/Pressure Rating Storage Temperature: -10 to 75°C (14 to 167°F) Operating Temperature: 0 to 65°C (32 to 149°F) Relative Humidity: 0 to 90% RH, non-condensing Flow Sensor PP: 12.5 bar @ 20°C, 1.7 bar @ 85°C (180 psi @ 68°F, 25 psi @185°F) PVDF: 14 bar @ 20°C, 1.7 bar @ 85°C (200 psi @ 68°F, 25 psi @ 185°F) Operating Temperature: PP: -18 to 85°C (0 to 185°F) PVDF: -18 to 85°C (0 to 185°F) Standards and Approvals: NEMA 4X (IP65) enclosure; CE approval
产品型号/产品描述 Pulse Divider, SPDT Relay Outputs FPB111 1/2 to 4" polypropylene FPB112 5 to 8" polypropylene FPB113 1/2 to 4" PVDF Pulse Divider, SSR outputs FPB121 1/2 to 4" polypropylene FPB122 5 to 8" polypropylene FPB123 1/2 to 4" PVDF switch, SPDT relay outputs FPB131 1/2 to 4" polypropylene FPB132 5 to 8" polypropylene switch, SSR outputs FPB141 1/2 to 4" polypropylene FPB142 5 to 8" polypropylene 4 to 20 mA output FPB151 1/2 to 4" polypropylene FPB152 5 to 8" polypropylene FPB153 1/2 to 4" PVDF Accessories FP-5310M 1" Molded PVC SCH 40 installation fitting; seeFP Series Fittingsfor additional fittings PSU-93 24 Vdc power supply TX4-100 4-conductor shielded cable, 30 m (100')
注释: Comes complete with operator’s manual. Installation fitting ordered seperately.
粤公网安备 44030402001379号
