PX6000L1-050GI压力变送器 美国omega
扩散型半导体压力传感器PX6000-I 扩散半导体压力传感器 高可靠性 长期稳定性 所有不锈钢 真空范围 5点NIST证书包括 应用 汽车试验 研究与发展 工程测试与评估 生产试验 飞行记录器 发动机监控 地面支持设备 内置的温度传感器 OMEGA's PX6000 Series pressure transducers fit easily into many applications. These low-cost transducers are small and light, and mounting requires no bulky structures. Users can select from 3 electrical terminations and 6 pressure fittings. The sensor is a small [about 2.54 mm (0.1") square] silicon chip, with 4 diffused strain gages mounted in the stainless steel case. Laser-trimmed resistors provide temperature compensation and adjust zero balance and span. The 4 to 20 mA output easily interfaces with most control and data acquisition systems. The PX6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high-shock environments because the films add no significant mass. Corrosion resistance is outstanding, and the isolation will remain effective because there are no gel or oil columns to deteriorate. The PX6000 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-25 bar pressure ranges. Please see the PXM6000 for complete details, or contact our Pressure department for more information.. SPECIFICATIONS 4 to 20 mA Models Excitation: 12 to 40 Vdc unregulated Output: 4 to 20 mA adjustable ±10% FS Load Impedance (Max): 50 x (V - 10) Ω where V = supply voltage (40 Vdc max) Zero Balance: 4 mA adjustable ±10% FS Dielectric Isolation Resistance: 100 MΩ minimum at 45 Vdc applied between the case or a conductive medium and the bridge circuit Sensing Element: 4-active-arm bridge using a micromachined diffused silicon diaphragm sensor, thin-film media and dielectric isolation barriers Temperature Sensor: Output resistance @ 24°C (75°F) 900 to 1500 Temperature Coefficient: 8% min, 10% max per 55.5°C (100°F) Accuracy: Combined linearity, hysteresis and repeatability ≤±0.25% FS for all ranges Operating Temp Range: -29° to 85°C (-20° to 185°F) Compensated Temp Range: -29° to 85°C (-20° to 185°F) Thermal Effects: Span: ≤±0.02% of FS/°F. Zero: ≤±0.02% of FS/°F Vibration Sensitivity: At 20 g peak sinusoidal vibration from 10 Hz to 2000 Hz (?" D.A.), the output shall not exceed 0.04% FS/g for 15 psi range to 0.005% FS/g for 100 psi and above Natural Frequency: Greater than 35 kHz for 100 psi and above Shock: 100 g, 11 ms half sine wave without damage Proof Pressure: 2 times rated pressure will not cause changes in performance beyond the specified tolerances Burst Pressure: 3 times rated pressure for pressure ranges below 200 psi, or 2.5 times rated pressure for pressure ranges above 200 psi, will not cause rupture of the pressure sensor Wetted Parts: 316 stainless steel, silicon, Pyrex? glass, epoxy, Kovar? Electrical Connection: PTIH-10-6P (standard), 0.6 m (2') cable or 4-pin solder terminal header (optional) Pressure Port: MS33656-4 male (std) Optional: MS33649-4 female, ?-18 or 1?8-27 NPT male or female Weight: 170 g (6 oz) typical Mating Connector: PTS06A-10-6S (not included) 注释: Metric Ranges Available - Consult Engineering
产品型号/产品描述 PX6000L1-30VACI 30-0 in-Hg Vacuum Range transducer with 4-20 mV output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-015AI 15 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-020AI 20 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-050AI 50 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-100AI 100 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-200AI 200 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-300AI 300 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-015GI 15 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-020GI 20 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-050GI 50 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-100GI 100 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-200GI 200 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port PX6000L1-300GI 300 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
产品型号说明 (1) (2) (3) (4) (5) (6) PX6000 - Qty: Add To Shopping Cart 选项描述 (1) Pressure Port 选择 A 代表 1/8-27 NPT Male B 代表 1/8-27 NPT Female C 代表 1/4-18 NPT Male D 代表 1/4-18 NPT Female L 代表 MS33656-4 Male M 代表 MS33649-4 Female (2) Electrical Connection 选择 0 代表 2' (6m) cable (std) +2$/ft over 2' 1 代表 PT1H-10-6P Connector or equal (no charge) (mating connector not included) 3 代表 4-pin Eyelet Header (no charge) (3) Range 选择 30 代表 30 to 0 in-Hg (Vacuum only) 015 代表 0-15 psi 020 代表 0-20 psi 050 代表 0-50 psi 100 代表 0-100 psi 200 代表 0-200 psi 300 代表 0-300 psi (4) Units 选择 VAC 代表 Vacuum Model G 代表 Gage Model A 代表 Absolute Model (5) Output 选择 V 代表 mV/V Output 5T 代表 0 to 5 Vdc Output I 代表 4 to 20mA Output (6) Options 选择 代表 No Options -CAL11 代表 11 point NIST Calibration $250 adder -xxFT 代表 Extra length of cable $2/ft over 3ft
粤公网安备 44030402001379号