VERTICAL | Channels | 2 | Bandwidth | DC ~ 200MHz (-3dB) | Rise Time | 1.75ns Approx. | Sensitivity | 2mV/div ~ 5V/div ( 1-2-5 increments) | Accuracy | ∮(3% x|Readout|+0.05 div x Volts/div+0.8mV) | Input Coupling | AC, DC & Ground | Input Impedance | 1M ∮2%,~16pF | Polarity | Normal & Invert | Maximum Input | 300V (DC+AC peak), CATII | Waveform Signal Process | + , - , FFT | Offset Range | 2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V | Bandwidth Limit | 20MHz (-3dB) | TRIGGER | Sources | CH1 , CH2 , Line , EXT | Modes | Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only) | Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 200MHz : Approx. 1div or 10mV | EXT TRIGGER | Range | 15V | Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 200MHz : ~100mV | Input Impedance | 1M ∮2% , ~16pF | Maximum Input | 300V (DC AC peak) , CATII | HORIZONTAL | Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div | Modes | MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y | Accuracy | ∮0.01% | Pre-Trigger | 20 div maximum | Post-Trigger | 1000 div | X-Y MODE | X-Axis Input | Channel 1 | Y-Axis Input | Channel 2 | Phase Shift | ∮3 at100kHz | SIGNAL ACQUISITION | Real-Time Sample Rate | 1GSa/s maximum | Equivalent Sample Rate | 25GSa/s maximum | Vertical Resolution | 8 Bits | Record Length | 25K Dots maximum | Acquisition Mode | Normal, Peak Detect, Average | Peak Detection | 10ns | Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | CURSORS AND MEASUREMENT | Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot | Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle | Delay Measurement | Eight different delay measurement | Cursors Measurement | Voltage difference between cursors (V) Time difference between cursors (T) | Auto Counter | Resolution : 6 digits
Accuracy : ∮2%
Signal Source: All available trigger source except the Videotrigger mode | CONTROL PANEL FUNCTION | Autoset | Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically | Save Setup | Up to 20 sets of measurement conditions | Save Waveform | 24 sets of waveform | DISPLAY | TFT LCD Type | 5.6 inch | Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots | Display Graticule | 8 x 10 divisions ; 8 x 12 divisions (menu off) | Display Brightness | Adjustable | INTERFACE | Go/NoGo Output | 5V Maximum/10mA TTL Open Collector Output | RS-232 Interface | DB 9-pin male DTE RS-232 interface | GPIB Interface (Option) | Fully programmable with IEEE 488.2 compliance | USB | USB Host/Device 2.0 full speed supported | POWER SOURCE | Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | Battery Power(Option) | Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition | MISCELLANEOUS | Multi-Language Menu | Available | Online Help | Available | Time Clock | Time and Date, Provide the Date/Time for saved data | DIMENSIONS &WEIGHT | 254D x 142H x 310W(mm)
Approx. 4.3kg |
|