|
| |
| |
| |
| 2mV/div ~ 5V/div (1-2-5 increments) |
| ±(3% x |Readout|+0.05 div x Volts/div+0.8mV) |
| |
| |
| |
| |
| |
| 2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V |
| |
|
| CH1 , CH2 , CH3 , CH4 , Line |
| Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge |
| AC , DC , LF rej. , HF rej. , Noise rej. |
| DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 60MHz : Approx. 1div or 10mV |
| |
|
| 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| MAIN , WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y |
| |
| |
| |
|
| |
| |
| |
|
| |
| |
| |
| |
| Normal, Peak Detect, Average |
| |
| 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
|
| Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot |
| Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle |
| Eight different delay measurement |
| Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) |
| Resolution : 6 digits Accuracy : ±2% Signal Source: All available trigger source except the Video trigger mode |
|
| Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically |
| Up to 20 sets of measurement conditions |
| |
| |
| |
| 234 (Vertically) x 320 (Horizontally) Dots |
| 8 x 10 divisions ; 8 x 12 divisions (menu off) |
| |
| |
| 5V Maximum/10mA TTL Open Collector Output |
| DB 9-pin male DTE RS-232 interface |
| Fully programmable with IEEE 488.2 compliance |
| USB Host/Device 2.0 full speed supported |
| |
| AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
| Battery : 11.1V Li-Ion battery pack Charge Time : 8 hours (Power ON) Operating Time : 3 hours , depending on operating condition |
| AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
|
| |
| |
| Time and Date, Provide the Date/Time for saved data |
| 254D x 142H x 310W(mm) Approx. 4.3kg |