OMNIA® model 8106 provides AC Hipot, DC Hipot, Insulation Resistance, Ground Bond/Continuity, Functional Run and Line Leakage tests in a single DUT connection. The 8106 can be used as a bench top instrument or as a PC controlled system used in tandem with our Autoware® control software and is well suited for applications that require multiple electrical safety tests including Line Leakage tests. In addition the 8106 is a true Line Leakage tester. It will perform all 8 Line Leakage tests as called out by a variety of agency specifications and incorporates 7 different measuring device configurations to simulate the human body impedance models for a variety of specifications. Leakage measurements can be either, True RMS or PEAK as required by the IEC 60990 for measuring touch currents. The 8106 can also perform patient lead tests with an optional scanning matrix. The ability to perform these tests in a single instrument through one DUT connection will increase productivity and increase efficiency allowing manufacturers to save time and money. It features an enhanced graphic LCD and simplified user-interface that makes testing safer, easier and more reliable than ever before. Features
· Ethernet Communication Card· RS-232, & GPIB Interfaces· Data Storage Card· Interconnection to AC1000 Companion Power Source· Interconnection to Modular Scanning Matrix· Storage of up to 50 setups with 30 steps per setup· Perform patient lead tests w/ optional scanner· Patented SmartGFI® function· Patented Prompt and Hold function· Patented CAL-ALERT® function· Patented VERI-CHEK® function· Patented CHARGE LO & RAMP HI· 40-Amp Ground Bond· Dual Function Ground Bond and Ground Continuity Functions· Built-in Real Current Measurement· 4-Wire Measurement