GE FANUC HORNER 产品选型指南

Replacement Battery for OCS/RCS

Power Control Smart Stack.  Input Range 120three-phase Wye, 208V line to line

2 channel Analog Inputs, Voltage (0-5vdc,+/-5vdc, 0-10vdc, +/-10vdc), 12 bit

2 channel Analog Inputs, Current (0-20mA,4-20mA), 12 bit

4 channel Analog Inputs, Voltage (0-5vdc,+/-5vdc, 0-10vdc, +/-10vdc), 12 bit

4 channel Analog Inputs, Current (0-20mA,4-20mA), 12 bit

16-bit, 4 channel Analog Inputs, Current(+/-20mA, 0-20mA, 4-20mA)

12 Channel Analog Inputs Current, Voltage orThermistor.  Channel selectable. 0 – 20ma ,0 – 5VDC,Thermistor (-37 to 115C/ -35 to 240F), 12bit Resolution

ASCII BASIC. Three ports, two active at any onetime.  64K of program memory.

FOX Fiber Cable Pair, 0.5M

FOX Fiber Cable Pair, 1.0M

FOX Fiber Cable Pair, 2.0M

FOX Fiber Cable Pair, 5.0M

FOX Fiber Cable Pair, 10.0M

Programming cable for Color-Touch OCS.  6'cable, with RJ-45 connector on one end, & DB9 adapter on otherend

2 channel Analog Outputs, Voltage (+/-10vdc), 14bit

2 channel Analog Outputs, Current (4-20mA), 14bit

4 channel Analog Outputs, Voltage (+/-10vdc), 14bit

4 channel Analog Outputs, Current (4-20mA),14bit

14-bit, 4-channel Analog Output, 0-20mASourcing

8 channel Analog Outputs (4-20mA, 0-10vdc)ch-by-ch select.

8 DC Inputs (12/24vdc, pos/neg logic).

16 DC Inputs (12/24vdc, pos/neg logic)

32 DC Inputs (12/24vdc, pos/neg logic).

8 DC Inputs (12/24vdc, pos/neg logic), 8 DCOutputs (5/12/24vdc, 0.5A, neg logic)

8 DC Inputs (12/24vdc, pos/neg logic), 6 RelayOutputs (3.0A per point isolated)

8 DC Inputs (12/24vdc, pos/neg logic), 8 DCOutputs (5/12/24vdc, 0.5A, pos logic with ESCP)

8 AC Inputs (120 vac), 6 Isolated Relay Outputs(3.0Aper point)

8 AC Inputs (120vac), 8 AC Outputs (80-250vac,0.3A)

8 AC Input (120 VAC) , 8 AC Output (250 VAC max,2A)

16 DC Inputs (12/24vdc), 12 DC Outputs(5/12/24vdc,o.5A neg. logic with ESCP)

14 DC Inputs/ 10 Relay Outputs, 12/24VDC Sink orSource,Relay Out, 3 amps. Isolated, 2 per common

16 DC Inputs (12/24vdc), 12 DC Outputs(5/12/24vdc,o.5A pos. logic with ESCP)

14 AC Inputs/ 10 Outputs, 120 - 160VAC Sink orSource, Relay Out, 3 amps. Isolated, 2 per common

32 DC Inputs/ Outputs,24VDC Sink  inputs, 5– 35VDC Sinking Outputs

DeviceNet Master SmartStack Module

8 Relay Outputs (4.0A per point isolated)

16 DC Outputs (5/12/24vdc, 0.5A pos logic withESCP)

32 DC Outputs (5/12/24vdc, 0.5A pos logic withESCP)

20 Relay Outputs (250vac, 30vdc, 2.0A)

32 DC Inputs/ 40 Outputs with Relay pack andCables, 24VDC Positive In, and Relay Pack, isolated up to 5 ampsper point

SmartStack Ethernet card.  10baseTconnection

FOX Fiber Optic Base

FOX Fiber Optic Base/Hub

High Speed Counter and PWM/Pulse Train: 8configurable DC inputs (up to 2 counters max., 10MHz each, singleor A QUAD B and 8 DC neg. logic outputs with ESCP configurable (upto 2 PWM/Pulse Train 5 MHz each)

High Speed Counter and PWM/Pulse Train: 8configurable DC inputs (up to 2 counters max., 10MHz each, singleor A QUAD B and 8 DC pos. logic outputs with ESCP configurable (upto 2 PWM/Pulse Train 5 MHz each)

2 channel Voltage (+/-10vdc) Inputs, 2 channelVoltage (+/-10vdc) Outputs

2 channel Current (4-20mA) Inputs, 2 channelCurrent (4-20mA) Outputs

8 DC Inputs (12/24vdc), 8 DC Outputs(5/12/24vdc,0.5A pos. logic with ESCP) and 4 channels AnalogInputs, voltage (+/- 10vdc), 12 bit; 2 channels Analog Outputs,voltage (+/- 10vdc)

8 DC Inputs (12/24vdc), 8 DC Outputs(5/12/24vdc,0.5A pos. logic with ESCP) and 4 channels AnalogInputs, current (4 to 20ma), 12 bit; 2 channels Analog Outputs,current (4-20ma)

8 DC Inputs (12/24vdc), 8 DC Outputs(5/12/24vdc,0.5A neg. logic with ESCP) and 4 channels AnalogInputs, current (0-20ma, 4-20ma), 12 bit; 2 channels AnalogOutputs, current (4-20ma)

8 DC Inputs (12/24vdc), 6 Relay Outputs (3.0Aea), 4 Analog Inputs (o-20mA, 0-5v, thermister), 2 Analog Outputs(o-20mA, 0-10v)

8 DC Inputs (12/24vdc), 8 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP) & 4 channels Analog Inputs, current(0-20mA, 4-20ma), 12 bit; 2 channels Analog Outputs, currentsourcing (4-20ma)

8 DC Inputs (12/24vdc), 8 DC Outputs(5/12/24vdc,0.5A pos. logic with ESCP) and 4 ISOLATED (500V)channels Analog Inputs, current (0-20ma, 4-20ma), 12 bit; 2channels ISOLATED (500V) Analog Outputs, current (4-20ma)

Temperature Controller I/O Board.  4temperature inputs (RTD/Thermocouple) selectable ch-by-ch, 2channels Analog Outputs, current (4-20mA), 2 Relay Outputs (250vac,30vdc, 5.0A), 2 DC Outputs (5/12/24vdc, 0.5A neg logic withESCP).

16 DC Inputs (pos/neg), 12 Relay Outputs (5 Amp),and CsCAN

OCS with 2x20 LCD Display and with 16keypad.  Built in I/O no expansion. 8 DC Inputs (12/24vdc), 8DC Outputs (5/12/24vdc, 0.5A pos. logic with ESCP).  Nonetwork

OCS with 2x20 LCD Display and with 16keypad.  Built in I/O no expansion. 8 DC Inputs (12/24vdc), 8DC Outputs (5/12/24vdc, 0.5A neg. logic with ESCP).  Nonetwork

OCS with 2x20 LCD Display and with16-keypad.  Built in I/O no expansion.  High SpeedCounter and  PWM/PT.  8 DC Inputs (12/24vdc), 8 DCOutputs (5/12/24vdc, 0.5A pos. logic) No network

OCS with 2x20 LCD Display and with16-keypad.  Built in I/O no expansion.  High SpeedCounter and  PWM/PT.  8 DC Inputs (12/24vdc), 8 DCOutputs (5/12/24vdc, 0.5A neg. logic) No Network

OCS with 2x20 LCD Display and with 16-keytactical feel keypad.  Built in I/O no expansion. One RS-232serial port supporting CsCAN and RTU Master/Slave. 8 DC Inputs(12/24vdc), 6 Relay Outputs (3.0A per point).No networkinterface.

OCS with 2x20 LCD Display and with 16-keypad.  Built in I/O no expansion. 8 AC Inputs (120vac),8  AC  Outputs (80-250vac 0.3A per point). No networkinterface.

OCS with 2x20 LCD Display and with 16-keytactical feel keypad.  Built in I/O no expansion. One RS-232serial port supporting CsCAN and RTU Master/Slave.  8 ACInputs (120vac), 6 Relay Outputs (3.0A per point).  No networkinterface.

OCS with 2x20 LCD Display and with 16-keyKeypad.  16 DC Inputs (12/24vdc), 12 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP).  No network interface

OCS with 2x20 LCD Display and with 16-keykeypad.  Built in I/O no expansion. 16 DC Inputs (12/24vdc),12 DC Outputs (5/12/24vdc, 0.5A neg. logic with ESCP).  Nonetwork interface

14 DC Inputs (12/24vdc), 10 Relay Outputs (3.0Aea.)

14 AC Inputs (120vac), 10 Relay Outputs (3.0Aea)

Temperature Controller I/O Board.  4temperature inputs (RTD/Thermocouple) selectable ch-by-ch, 2channels Analog Outputs, current (4-20mA), 2 Relay Outputs (250vac,, 30vdc, 5.0A), 2 DC Outputs (5/12/24vdc, 0.5A neg logic withESCP)

OCS with 2x20 LCD Display and with 16-keytactpad.  8 DC Inputs (12/24vdc), 8 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP) and 4 In/2 Out Analog, Voltage.  NoNetwork.

OCS with 2x20 LCD Display and with 16-keytactpad.  8 DC Inputs (12/24vdc), 8 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP) and 4 In/2 Out Analog, Current.  NoNetwork.

8 DC Inputs (12/24vdc), 6 Relay Outputs (3.0Aea), 4 Analog Inputs (0-20mA, 0-5v, thermister), 2 Analog Outputs(0-20mA, 0-10v)

MiniOCS with 2x20 LCD & 16 keypad &onboard IO (no expansion) 8 DC inputs (pos/neg)without CsCAN, 8 DCOutputs (pos), 4 ISOLATED analog in (20mA), 2 ISOLATED analog out(20mA)

OCS with 2x20 LCD Display and with 16keypad.  Built in I/O no expansion. 8 DC Inputs (12/24vdc), 8DC Outputs (5/12/24vdc, 0.5A pos. logic with ESCP). Built-innetwork.

OCS with 2x20 LCD Display and with 16keypad.  Built in I/O no expansion. 8 DC Inputs (12/24vdc), 8DC Outputs (5/12/24vdc, 0.5A neg. logic with ESCP).  Built-innetwork

OCS with 2x20 LCD Display and with16-keypad.  Built in I/O no expansion.  High SpeedCounter and  PWM/PT.  8 DC Inputs (12/24vdc), 8 DCOutputs (5/12/24vdc, 0.5A pos. logic) With CAN network.

OCS with 2x20 LCD Display and with16-keypad.  Built in I/O no expansion.  High SpeedCounter and  PWM/PT.  8 DC Inputs (12/24vdc), 8 DCOutputs (5/12/24vdc, 0.5A neg. logic) With CAN Network

OCS with 2x20 LCD Display and with 16-keypad.  Built in I/O no expansion.  8 DC Inputs(12/24vdc), 6 Relay Outputs (3.0A per point). With CAN networkinterface.

OCS with 2x20 LCD Display and with 16-keypad.  Built in I/O no expansion. 8 AC Inputs (120vac),8  AC  Outputs (80-250vac 0.3A per point). With CAN network interface.

OCS with 2x20 LCD Display and with 16-keypad.   8 AC Inputs (120vac), 6 Relay Outputs (3.0A perpoint).  With CAN network interface.

OCS with 2x20 LCD Display and with 16-keyKeypad.  16 DC Inputs (12/24vdc), 12 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP).  With CAN network interface

OCS with 2x20 LCD Display and with 16-keykeypad.  Built in I/O no expansion. 16 DC Inputs (12/24vdc),12 DC Outputs (5/12/24vdc, 0.5A neg. logic with ESCP).  WithCAN network interface

14 DC Inputs (12/24vdc), 10 Relay Outputs (3.0Aea) & CsCAN

14 AC Inputs (120vac), 10 Relay Outsputs (3.0Aea) & CsCAN

Temperature Controller I/O Board.  4temperature inputs (RTD/Thermocouple) selectable ch-by-ch, 2channels Analog Outputs, current (4-20mA), 2 Relay Outputs (250vac,30vdc, 5.0A), 2 DC Outputs (5/12/24vdc, 0.5A neg logic with ESCP)& CsCAN

OCS with 2x20 LCD Display and with 16-keytactpad.  8 DC Inputs (12/24vdc), 8 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP) and 4 In/2 Out Analog, Voltage. With CAN Network.

OCS with 2x20 LCD Display and with 16-keytactpad.  8 DC Inputs (12/24vdc), 8 DC Outputs (5/12/24vdc,0.5A pos. logic with ESCP) and 4 In/2 Out Analog, Current. With CAN Network.

8 DC Inputs (12/24vdc), 6 Relay Outputs (3.0Aea), 4 Analog Inputs (0-20mA, 0-5v, thermister), 2 Analog Outputs(0-20mA, 0-10v) and CsCAN

MiniOCS with 2x20 LCD & 16 keypad &onboard IO (no expansion) 8 DC Inputs (pos/neg) with CsCAN, 8 DCOutputs (pos), 4 ISO analog in (20mA), 2 ISO analog out(20mA)

OCS with 2x20 LCD Display, and 17-key tactilefeel keypad.  Supports up to 4 SmartStack I/O Boards, fullladder instruction set and CsCAN Networking.

OCS with 2x20 LCD Display, and 17-key tactilefeel keypad.  Supports up to 4 SmartStack I/O Boards, fullladder instruction set and CsCAN Networking.

OCS with 4x20 LCD Display, and 32-key tactilefeel keypad.  Supports up to 4 SmartStack I/O Boards, fullladder instruction set, and CsCAN Networking.

OCS with 4x20 LCD Display, and 32-key tactilefeel keypad.  Supports up to 4 SmartStack I/O Boards, fullladder instruction set, and CsCAN Networking.

Graphical OCS Screen size 130 x 75 mm monochrome,(2) serial ports, (1) RS-232 and (1) RS-485/RS-232 port, (1) CANport 3 meg of screen memory and 64K of logic.

OCS300 5.7" STN WITHOUT ETHERNET

OCS300 5.7" STN WITH ETHERNET

OCS350 5.7" TFT WITHOUT ETHERNET

OCS300 5.7" TFT WITH ETHERNET

OCS350 DEMO KIT WITH CASE

OCS351 DEMO KIT WITH CASE

OCS250 Demo with Case

Starter Kit includes IC300OCS035 andIC300OSW232.  No simulator.  Limited one percustomer

Starter Kit includes IC300OCS033 andIC300OSW232.  No simulator.  Limited one percustomer  (HSC/PWM)

Starter Kit includes IC300OCS052 andIC300OSW232.  No simulator.  Limited one per customer(DC/DC/Vin/Vout)

Starter Kit includes IC300OCS037 andIC300OSW232.  No simulator.  Limited one per customer(AC/Relay)

OCS100 Demo Kit, incl. DIQ616, buttons &LEDs

Starter kit includes carring case, IC300OCS100,IC300DIQ616, IC300OSW232, simulator with 8 switch inputs and 8output lights, DC supply and startup guide

Demonstration Case.  Includes OCS100,OCS200, and variety of SmartStack Hardware.

Cscape PDA Software with Handspring Visor/VisorDeluxe/Prism Cable

Cscape PDA Software with Palm III SeriesCable

Cscape PDA Software with Palm V SeriesCable

Cscape programming software (CD ROM), RS-232programming cable, and complete software/hardwaredocumentation.

OCS Handheld Programmer

8 DC Inputs (12/24vdc), 8 Positive Logic DCOutputs (5/12/24vdc, 0.5A with ESCP).  Built-in networkinterface for CsCAN or DeviceNet slave.

8 DC Inputs (0-24vdc), 8 Positive Logic DCOutputs (5/12/24vdc, 0.5A with ESCP).  2 Inputs configurableas High Speed Counters, 500KHz each.  2 Outputs configurableas PWM/Pulse Train.  Built-in network interface for CsCAN orDeviceNet slav

8 DC Inputs (12/24vdc), 6 Relay Outputs (4.0A perpoint).  Built-in network interface of CsCAN or DeviceNetslave.

16 DC Inputs (12/24vdc), 12 Positive Logic DCOutputs (5/12/24vdc, 0.5A with ESCP)

14 DC Inputs (12/24vdc), 10 Relay Outputs (2.5Aper point).  Built-in network interface for CsCAN or DeviceNetslave.

14 AC Inputs (120vac), 10 Relay Outputs (2.5A perpoint).  Built-in network interface for CsCAN or DeviceNetslave.

8 DC Inputs (12/24vdc), 8 Positive Logic DCOutputs (5/12/24vdc, 0.5A with ESCP), 4 Analog Inputs (0-5vdc,+/-5vdc, 0-10vdc, +/-10vdc, 12 bit).  2 Analog Outputs(+/-10vdc).  Built-in network interface ofr CsCAN or DeviceNetsalve

8 DC Inputs (12/24vdc).  8 Positive Logic DCOutputs (5/12/24vdc, 0.5A with ESCP), 4 Analog Inputs (0-20ma,4-20ma, 12 bit), 2 Analog Outputs (4-20ma).  Built-in networkinterface for CsCAN or DeviceNet slave

8 DC Inputs (12/24vdc), 6 Relay Outputs (3.0Aea), 4 Analog Inputs (0-20mA, 0-5v, thermister), 2 Analog Outputs(0-20mA, 0-10v)

Remote Control Station (OCS without Keypad anddisplay)  Supports up to 4 SmartStack I/O Boards, full ladderinstruction set, and CsCAN Networking.

RCS w/128K Ladder, 32Kb Rgisters, 1 port,SmartStack I/O

2 channel RTD Inputs (Pt-100, Pt-200, Pt-500,Pt-1000), 18 bit

4 channel RTD Inputs (Pt-100, Pt-200, Pt-500,Pt-1000), 18 bit

Stepper Indexer. Single axis, supports-typesignals only (pulse train out, quadrature or Up/Down in)

2 channel Thermocouple or Strain Guage Inputs (J, K, T, E), or +/- 25mV, +/- 50mV, and100mV.   18 bit

4 channel Thermocouple or Strain Guage Inputs (J,K, T, E),  or +/- 25mV, +/- 50mV, and 100mV.  18-bit, 8channel Thermocouple Inputs (J, K, T, E, +/-25mV, +/-50mV,+/-100mV), 0.05 degree Centigrade resolution

Operator Control Station, Two serial ports, (1)RS-232 and (1) RS-485/RS-232 port, (1) CAN port.  NoSmartStack or Control Support

Operator Control Station, Two serial ports, (1)RS-232 and (1) RS-485/RS-232, (1) CAN  port with keypad. NoSmartStack or Control Support.

Graphical Operator Control Station Two serialports, (1) RS-232 and (1) RS-485/RS-232 port, (1) CAN port, 3 megof screen memory.  (4) SmartStack support.  No controllersupport.

Gage-clamp (screw) style Power plug, 2terminal

Gage-clamp (screw) style Power/Ground plug, 3Terminal

Cage-clamp (screw) style Network plug, 5terminal

Spring-clamp style I/O plug, 6-terminal

Spring-clamp style I/O plug, 8-terminal

Spring-clamp style I/O plug, 12-terminal

Spring-clamp style I/O plug, 14-terminal

Spring-clamp style I/O plug, 16-terminal

Spring-clamp style I/O plug, 19-terminal

Cage-clamp (screw) style I/O plug, 8terminal

Cage-clamp (screw) style I/O plug, 12terminal

Cage-clamp (screw) style I/O plug, 19terminal

Cbreeze Graphical programming software withcable

ISA CsCAN Interface Board

ISA CsCAN Interface Board, (2) CsCAN ports

OPC Server for CsCAN (requiresCGM500)   

CsCPCI CsCAN Interface Board, 1 channel. Bundled with CsCAN OPC Server

PCI CsCAN Interface Board, 2 channel. Bundled with CsCAN OPC Server.

Series 90-30 CsCAN interface module.  OneCsCAN port and one programming port for network devices.

Series 90-30 Cscape CPU supports 1,024 I/O. Theprocessor can be programmed the same as the OCS products over thebuilt-in network that supports CsCAN or DeviceNetSlave.

Interbus-S RMU (Remote Message Unit) supportingMMICOM.

CAN network isolated repeater

GPS time server of HE693SER300:provides timesynchronization between seperate racks or locations

DeviceNet Interface board for AF300E$

Genius Communications Interface for GE AF-300E$Adjustable Freq. Drives

Genius card for GE Drive G11 and P11

Genius interface board for AV300/DV300Drives

Interbus-S interface board for AF300E$drives.

RTU Communications Interface for GE AF-300E$Adjustable Frequency Drives

Drive configuration software for  GEN100 andRSL100.

Isolated RS-485 to RS-232 Adapter

Isolated RS-485 to RS-485 Repeater

Genius BASIC Programmable Co-processor with (2)RS-232 ports

Genius BASIC Prog. Co-processor with RS-232 andRS-422/485 ports

Genius "C" Programmable Co-processor with (2)RS-232 ports

Genius "C" Prog. Co-processor with RS-232 andRS-422/485 ports

RTU/Modbus slave device with (1) Genius + (1)RTU/Modbus port

"C" Compiler for CGM224, CGM324, CGM424

Sequential Event Recorder, 16pt 24VDC

Genius sequential event recorder with 8 inputs(30-300VDC) with 1ms resolution, network synchronization, andIRIG-B.

Field Control Input Simulator 8 point

Field Control Analog Input Module, 8 Ch, 0 to10Vdc and +/-10Vdc,  Single Ended, 12 Bits, 11 Bits +Sign

Field Control Analog Input Module, 8 Ch, 0 to10Vdc and +/-10Vdc,  400Vdc Channel to Channel Isolation,1000Vdc Channel to Bus Isolation, 12Bits, 11Bits + Sign

Field Control Analog Input Module, 8 Ch, 4 to20ma, 400Vdc Channel to Channel Isolation, 1000Vdc Channel to BusIsolation, 12Bits

Field Control Interbus S  Bus InterfaceUnit

Field Control 16 Pt High Current Relay Output, 15Form A and 1 Form C Contacts

Handheld Program Loader

Programmable Memory for HPL

4ch., +/-10Vdc Analog Input Module, 700VacIsolation, 14-bit resolution

4-ch.+/-25mV, +/-50mV, +/-100mV

4ch., +/-10Vdc Analog Input Module, 2000VacIsolation, 14-bit resolution

4ch., 4-20mA/0-20mA Analog Input, 700VacIsolation, 14-bit resolution

4ch., 4-20mA/0-20mA Analog Input, 2000VacIsolation, 14-bit resolution

8 channel, +/- 10VDC HS, 16-bit resolution

64K ASCII BASIC Module w/two RS-232 and oneRS-485 port, EEPROM

ASCII BASIC module for Series 90-30 with 32kEEPROM, 32k NVRAM, 2 RS-232 ports, 1 RS-485 port and a 14.4 kbaudmodem.

SDS Bus Interface Module

Mounting bezel for compact OIUs.

Mounting bezel for full-sized OIUs.

Calibration Kit for all Horner Electric AnalogModules

6-foot comm cable for all OIU models exceptGenius and OIU027

RS-232 cable for 9-pin personal computer serialport

9-pin RS-232 cable only

CAN data concentrator of SER300 required forconnectivitiy to multiple I/O racks or to PLC rack

4ch., +/-10Vdc Analog Output Module, 2000VacIsolation, 14-bit resolution

4ch., 4-20mA/0-20mA Analog Output, 2000VacIsolation, 13-bit resolution

PCIF-30 Windows DLL, single license

PCIF-30 Windows DLL, multi-license (8)

DeviceNet Scanner (master) module for Series90-30.

DeviceNet slave module for Series 90-30.

4 point, 30A @ 125VDC Breaker ControlModule

Operator Interface Displays, Clears PLC FulatTables

Hand Held Programmer Emulation Software (andhardware)

Terminal emulation SW, 3.5" disk

Personal Computer Programming Utility for allRelease 3.0 OIUs

Interbus-S slave module for Series 90-30.

Interbus-S slave module for Series 90-30autoconfiguring CPU313 rack.

Interbus-S slave module for Series 90-30 withadditional autoconfiguring CPU323 rack.

DIN rail mounted cold junction compensation blockfor thermocouple input modules.

Mini LCD OIU, 5VDC power (avail 1Q94) (requiresHE693IBMOIU-57B)

Compact LCD OIU powered by 5VDC with NumericKeypad

Compact VF OIU powered by 24VDC with NumericKeypad

Compact LCD Genius OIU w/numeric keypad, poweredby 24VDC

Compact VF Genius OIU w/numeric keypad, poweredby 24VDC

Compact VF OIU with 4-line display, powered by24VDC

Compact VF Genius w/4-line display, powered by24VDC

Full-sized VF OIU w/o LEDs powered by80-240VAC

Full-sized VF OIU powered by 80-240VAC

Full-sized Genius VF OIU powered by80-240VAC

Profibus DP master module for Series 90-30

Profibus DP slave module for Series 90-30.

Profibus DP slave module

PC Interface to Series 90-30 I/O in PC104 formfactor.

Power supply adapter for Series 90-30 to allowfor redundant power supplies.

8 point unfused relay module for Series 90-30,rated to 8A,  2 NO/NC, 6 NO.

8 point, 8A Isolated Relay Module, 2 NO/NC, 6NO

RTD Input, 6 channel, 3-wire, 0.5°C res., -100 to+850°C range (Pt-100)

RTD Input, 6 channel, 3-wire, 0.125°C res., -100to +260°C range (Pt-100)

6 channel RTD input module for Series 90-30 with700VDC bus-isolation and 0.05°C resolution.

6 channel RTD input module for Series 90-30 with700VDC bus-isolation, 0.05°C resolution and 50Hz filtering.

6 channel RTD input module for Series 90-30 with700VDC bus-isolation, 0.05°C resolution and 60Hz filtering.

RTU / Modbus master module for Series 90-30 with1 RS-232 port, 1 RS-485 port, supports Report by Exception.

Single Port RTU Slave Interface Module w/RS-232and RS-485

RTU / Modbus slave module for Series 90-30 with 1RS-232 port, 1 RS-485 port, and a 14.4 kbaud modem, supports Reportby Exception.

Series 90-30 sequential event recorder, usesstandard inputs

SNP to RS-232 Adapter only

SNP slave module for Series 90-30 with 1 RS-232port and 1 RS-485 port.

SNP slave module for Series 90-30 with 1 RS-232port, 1 RS-485 port and a 14.4 kbaud modem.

SNP to RS-232 Adapter + cable for personalcomputer 9-pin serial port

PC Interface "C" Driver Source Code

8 channel +/-20mV, +/-25mV, +/-30mV strain gageinput module for Series 90-30 with 16-bit resolution and weighingfunctions.

8-ch. +/-25mV, +/-50mV, +/-100mV with 16-bitresolution + weighing func.

One Axis Indexer Module

same as STP100E w/optical isolation, independentaccel/decel

One Axis Indexer Module w/incremental encoderfeedback

same as STP110E w/optical isolation, independentaccel/decel

One axis stepper positioning module for Series90-30 with incremental encoder feedback, optical isolation,independent acceleration/deceleration and indexed moves.

Three Axis (multiplexed) indexer module

same as STP300E w/optical isolation, independentaccel/decel

Three Axis (multiplexed) indexer module w/1 axisincr. encoder feedback

same as STP310E w/optical isolation, independentaccel/decel

Mini SNP unit, LCD display, 5Vdc power, (useHE693CBL150)

Thumbwheel Interface, sets (4) 4-digit registersin PLC (via SNP port)

Cable, for Thumbwheel Interface Unit, (6ft.)

16 ch. J, K, N, T, E, R, S, B, C 0.5 °Cresolution, °C/°F units,  16 alarms

4 ch. J, K, N, T, E, R, S, 0.5 °C resolution,°C/°F engr. units

4 ch. J, K, N, T, E, R, S, 0.5 °C resolution,°C/°F units, open circuit alarms

6 channel thermocouple input module for Series90-30 with 0.1°C resolution, bus/channel isolation and 50Hzfiltering.

6 channel thermocouple input module for Series90-30 with 0.1°C resolution, bus/channel isolation and 60Hzfiltering.

6 channel thermocouple input module for Series90-30 with 0.1°C resolution and bus/channel isolation.

8 ch. J, K, N, T, E, R, S, 0.5 °C resolution,°C/°F engr. units

8 ch. J, K, N, T, E, R, S, B, C 0.1 °C res.,°C/°F units, 8 temp + open circ. alarms

Same as THM884 with 60Hz filter

8 ch. J, K, N, T, E, R, S, 0.5 °C resolution,°C/°F units, open circuit alarms

Terminal Strip w/Ribbon Cable for GE Fanuc HighDensity I/O modules

9-pin to 25-pin adapter for HE693SNPCBL,HE693CBL222 and 25-pin serial ports

Series Six I/O Interface and software

TRU Master Module 90-70

RTU master/slave module

Series 90-70 Thermocouple Input Module, 16Channel

8 channel  thermocouple input module forSeries 90-70 with 0.1°C resolution and resistancemeasurement.

Single channel Genius interface module forVME.

Dual-channel Genius interface module forVME.

Cage-clamp (screw) style I/O plug, 6-terminal.(Qty 1).  May be used as an alternative to the standardSmartStack plugs which are spring-clamp style.

Cage-clamp (screw) style I/O plug, 8-terminal.(Qty 1)

Cage-clamp (screw) style I/O plug, 12-terminal.(Qty 1)

Cage-clamp (screw) style I/O plug, 14-terminal.(Qty 1)

Cage-clamp (screw) style I/O plug, 16-terminal.(Qty 1)

Cage-clamp (screw) style I/O plug, 19-terminal.(Qty 1)

Cage-clamp (screw) style I/O plug, 6-terminal.(Qty 10)

Cage-clamp (screw) style I/O plug, 8-terminal.(Qty 10)

Cage-clamp (screw) style I/O plug, 12-terminal.(Qty 10)

Cage-clamp (screw) style I/O plug, 14-terminal.(Qty 10)

Cage-clamp (screw) style I/O plug, 16-terminal.(Qty 10)

Cage-clamp (screw) style I/O plug, 19-terminal.(Qty 10)

DIN-rail mount Terminal Block, 12-pin. Compatible with most SmartStack Analog I/O.  

DIN-rail mount Terminal Block, 19-pin. Compatible with most SmartStack Digital I/O.   AllowsSmartStack I/O to be terminated on panel backplate as analternative to direct SmartStack termination on paneldoor. 

I/O Extension Cable, 12-pin, 0.5m.  For usein conjunction with TRM512

I/O Extension Cable, 19-pin, 0.5m.  For usein conjunction with TRM519

I/O Extension Cable, 12-pin, 1.0m.  For usein conjunction with TRM512

I/O Extension Cable, 19-pin, 1.0m.  For usein conjunction with TRM519

Shielded Distribution Cable, 26-pin, 1.0m. For use in conjunction with DST935

I/O Extension Cable, 12-pin, 2.0m.  For usein conjunction with TRM512

I/O Extension Cable, 19-pin, 2.0m.  For usein conjunction with TRM519

Distribution Adapter for DIQ935.  Connectsto DIQ935, converting high density D-sub connections to IDC styleconnections.  Provides 4 26-pin IDC connections, eachconnection supporting 16 inputs or 16 outputs