TH2825 High-speed LCR Meter Specifications
TH2825
TH2825A
Measurement function
Parameter
LCR
|Z|,R, X, G, B, C, L, Q, D, θ(deg), θ(rad)
Transformer
------
DCR, DCR2，M, Turns, N，1/N，L2A，L2B
Basic accuracy
0.1%
Equivalent circuit
Series, parallel
Mathematical function
ΔABS (absolute value deviation), Δ% (percent deviation)
Range mode
Auto, Hold, Manual conversion
Trigger mode
Internal, Manual, External, BUS
Measurement time
Fast: 15ms (note 1), medium: 66ms, slow: 500ms
Average times
1—255
Calibration function
Open, short, load correction
Measurement terminal
5-terminal
List sweep
4 frequencies, level, DC bias list sweep measurement
Display mode
Direct, ΔABS, Δ%, V/I (voltage/current monitor), bin No., and bin counter
Display
240×64 dot-matrix LCD display with resolution of 5 digits
Measurement signal
Signal frequency
Total 10 points: 50Hz,60Hz,100Hz,120Hz,1kHz,10kHz,20kHz, 40kHz, 50kHz,100kHz
Output impedance
25Ω，50Ω，100Ω， 25Ω/100Ω，C.V. (constant voltage)
Test level
10mVrms—1.0Vrms, with step of 1mV
DC bias source
Fixed ±2VDC，0~±5VDC adjustable
Resistance is 100Ω: ±50mA Max
Resistance is 25Ω: ±200mA Max
Measurement display range
|Z|, R, X
0.0001Ω — 99.999MΩ
G, B
0.0001μS — 999.99S
C
0.001pF — 1.9999F
L
0.001µH — 99.99kH
D
0.0001 — 9.9999
Q
0.0001 — 99999
θ (DEG)
-179.99º — 179.99 º
θ (RAD)
-3.1416 — 3.1416
Δ%
-99.999% — 999.999%
N,1/N
0.001—999.99
DCR
0.1 mΩ—199.99 kΩ
M,L2
0.001 μH—99.99 kH
Comparator and interface
Comparator
10 bins: 8 pass bins, 1 fail bin, 1 AUX bin
HIGH/PASS/LOW
Memory
12 sets of instrument settings saved and loaded
Interface
RS-232C, HANDLER, GPIB (option)
Note 1: Fast measurement time includes A/D, calculation, main/sub parameter comparison judgment,and
small-character display of measurement parameter. If measurement parameter is displayed in large
character, fastest measurement time is added by 5ms.
General Specifications
Ordering Information
TH2825 High-speed LCR Meter
TH2825A High-speed LCR Meter
Instrument Accessories
TH26005 4-terminal test fixture
TH26011 4-terminal test fixture 4-terminal Kelvin test cable
TH26010 gilded shorting plate
Options
TH26001 4-terminal test fixture
TH26005-2 4-terminal test fixture
TH26006 axial component test fixture (used with TH26005)
TH26007 core test fixture
TH26008 SMD component test fixture
TH26009 SMD component test tweezers
TH26029A SMD component test tweezers
TH26012 transformer test fixture (only for TH2825A)
TH26004-1 4-terminal test fixture
TH10001 GPIB interface board