Photovoltaic housing 600 V DC with connection terminals with IR

System solution for photovoltaic systems with connection terminals and remote signalling

• Error-resistant Y circuit for use according to VDE 0100-712 (IEC 60364-7-712)
• Low DC protection level: < 3.0 kV (Voc max = 900 V DC with V25-B+C/0-450PV)
• Low DC protection level: < 2.6 kV (Voc max = 600 V DC with V50-B+C/0-300PV)
• 5 parallel connection terminals up to 6 mm² for each polarity (+ and –)
• Pre-mounted in IP65 housing

Note: 5 PV strings can be switched in parallel on the terminals. The technical data (string voltage, etc.) and the conditions of the converter (number of MPP trackers) must be taken into account.
Additional measures may be necessary if there is the risk of condensation formation.

Type	U max DC V	Version	Art.-No.	Add to item list
VG-BC DC-MSFS600	600	Type 1+2 with FS in housing with terminals	5088695
VG-BC DC-MSFS900	900	Type 1+2 with FS in housing with terminals	5088696

Download Datasheet (PDF)

Article number			5088695	5088696
U max DC	Uc DC	V	600	900
SPD to EN 61643-11			Type 1+2	Type 1+2
Lightning protection Zone LPZ			0?2	0?2
Impulse discharge current (10/350)	Iimp	kA	12,5	7
Nominal discharge current (8/20)	In	kA	30	30
Maximum discharge current	Imax	kA	50	60
Voltage protection level	Up	kV	< 2,6	< 3,0
Response time	tA	ns	< 25	< 25
Connection cross-section, rigid		mm²	0.5 - 6	0.5 - 6
Connection cross-section, flexible		mm²	0.5 - 6	0.5 - 6
Temperature range	?	°C	-40 - +80	-40 - +80
Protection rating			IP 65	IP 65