Photovoltaic housing with 4 fuses

System solution for photovoltaic systems with connection terminals and entry set

• Error-resistant Y circuit with 3 varistors for use according to VDE 0100-712
• Low DC protection level: < 4.0 kV (Voc max = 1,000 V DC with V20-C/0-500PV)
• 5 parallel connection terminals to 6 mm² per polarity (+ and -)
• V-Tec entries set included
• Arrester, connectable with thermodynamic cut-off unit and visual function display
• Encapsulated, non-extinguishing zinc oxide varistor arrester for use in distributor housings
• Polycarbonate housing, weatherproof for outdoor use.

Note: 5 PV strings can be switched in parallel on the terminals. The technical data (string voltage, etc.) and the conditions of the converter (number of MPP trackers) must be taken into account.
Additional measures may be necessary if there is the risk of condensation formation.

Type	U max DC V	Version	Pack. pcs	Weight kg/100 pcs.	Art.-No.	Add to item list
VG-C DCPH1000-4S	1000	Type 2 in housing with 4 PV fuses	1	200.000	5088651

Download Datasheet (PDF)

Article number			5088651
U max DC	Uc DC	V	1000
SPD to EN 61643-11			Type 2
Lightning protection Zone LPZ			1?2
Nominal discharge current (8/20)	In	kA	20
Maximum discharge current	Imax	kA	40
Voltage protection level	Up	kV	< 4,0
Response time	tA	ns	< 25
Connection cross-section, rigid		mm²	0.5 - 6
Connection cross-section, flexible		mm²	0.5 - 6
Temperature range	?	°C	-40 - +80
Protection rating			IP 65