Photovoltaic housing with V-Tec entry

System solution for photovoltaic systems with connection terminals and entry

• Error-resistant Y circuit with 3 varistors for use according to VDE 0100-712 (IEC 60364-7-712)
• Low DC protection level: < 4.0 kV (Voc max = 1,000 V DC with V20-C/0-500PV)
• 5 parallel connection terminals up to 6 mm² for each polarity (+ and -)
• 8 V-Tec entries per side, pre-mounted in IP65 housing
• arrestor, connectable with thermodynamic cut-off unit and visual function display
• Encapsulated, non-extinguishing zinc oxide varistor arrestor for use in distributor housings

Note: 5 PV strings can be switched in parallel on the terminals. The technical data (string voltage, etc.) and the conditions of the inverter (number of MPP trackers) must be taken into account.

Type	U max DC V	Version	Pack. pcs	Weight kg/100 pcs.	Art.-No.	Add to item list
VG-C DC-PH1000-4	1000	Type 2 in housing with V-Tec insertion	1	145.000	5088703

Download Datasheet (PDF)

Article number			5088703
U max DC	Uc DC	V	1000
SPD to EN 61643-11			Type 2
Lightning protection Zone LPZ			1?2
Nominal discharge current (8/20)	In	kA	20
Maximum discharge current	Imax	kA	40
Voltage protection level	Up	kV	< 4,0
Response time	tA	ns	< 25
Connection cross-section, rigid		mm²	0.5 - 6
Connection cross-section, flexible		mm²	0.5 - 6
Temperature range	?	°C	-40 - +80
Protection rating			IP 65