台湾MINMAX电源 MAU201 MAU202 MAU206MAU207 MAU208 MAU209

点击查看大图

产品价格： < 面议

产品型号：MAU201 MAU202 MAU206MAU207 MAU208 MAU209

品牌：其它品牌

公司名称：珠海市明龙电子有限公司

所在地：其它区域日本

浏览次数：1522 次

立即询价在线咨询

产品简介

1W, High Isolation SIP, Single & Dual Output DC/DC Converters

产品详细信息

se-lection guide

model number	input voltage	output voltage	output current	efficiency	load regulation
model number	vdc	vdc	ma	% typ.	% max.
mau201	5( 4.5 – 5.5 )	3.3	260	73	10
mau202		5	200	71	10
mau203		9	110	76	8
mau204		12	84	78	7
mau205		15	67	78	7
mau206		±5	±100	72	10
mau207		±9	±56	77	8
mau208		±12	±42	78	7
mau209		±15	±34	79	7
mau211	12( 10.8 – 13.2 )	3.3	260	74	8
mau212		5	200	73	8
mau213		9	110	78	5
mau214		12	84	80	5
mau215		15	67	80	5
mau216		±5	±100	74	8
mau217		±9	±56	79	5
mau218		±12	±42	81	5
mau219		±15	±34	81	5
mau221	24( 21.6 – 26.4 )	3.3	260	73	8
mau222		5	200	71	8
mau223		9	110	76	5
mau224		12	84	78	5
mau225		15	67	79	5
mau226		±5	±100	72	8
mau227		±9	±56	76	5
mau228		±12	±42	79	5
mau229		±15	±34	80	5

minmax"s mau200 1w dc/dc"sare specially designed to providehigh levels of isolation 3000vdcin a miniature sip package.

the series consists of 27 modelswith input voltages of 5v, 12v and 24vdc which offers standard outputvoltages of 3.3v, 5v, 9v, 12v, 15v,±5v, ±9v, ±12v and ±15vdc for awide choice.

the mau200 series is an excellentse-lection for a variety of applicationsincluding distributed power systems,mixed analog/digital subsystems, portable test equipments, local power networks and battery backed systems.

mechanical dimensions

pin connections

pin	singles	duals
1	+vin	+vin
2	-vin	-vin
5	-vout	-vout
6	no pin	common
7	+vout	+vout

case size –
5v & 12v input – 19.5x6.1x10.2mm
	(0.77x0.24x0.40inch)
24v input –19.5x7.1x10.2mm
	(0.77x0.28x0.40inch)
case material –
non-conductive black plastic
weight –
5v & 12v input – 2.2g (0.08oz)
24v input– 2.6g (0.09oz)
tolerance	millimeters	inches
	x.x ±0.25	x.xx±0.01
	x.xx±0.13	x.xxx±0.005
pin	±0.05	±0.002

absolute maximum ratings
parameter		min.	max	units
input surge voltage (1000ms)	5vdc input models	-0.7	9	vdc
	12vdc input models	-0.7	18	vdc
	24vdc input models	-0.7	30	vdc
lead temperature(1.5mm from case for 10sec.)		---	260	°c
internal power dissipation		---	450	mw

exceeding the unit absolute maximum ratings could cause damage. these are not continuous operating ratings.

general characteristics
parameter	conditions	min.	typ.	max.	units
isolation voltage	60 seconds	3000	---	---	vdc
isolation resistance	500vdc	10	---	---	gω
isolation capacitance	100khz, 1v	---	60	100	pf
switching frequency		70	100	120	khz
mtbf	mil-hdbk-217f @25°c ground benign	2	---	---	mhrs

environmental characteristics
parameter	conditions	min.	max.	units
operating temperature	ambient	-40	+85	°c
operating temperature	case	-40	+90	°c
storage temperature		-40	+125	°c
humidity		---	95	%
cooling	free-air convection

output characteristics
parameter	conditions	min.	typ.	max	units
line regulation	for vinchange of 1%	---	±1.2	±1.5	%
load regulation	io = 20% to 100%	see se-lection guide			%
ripple & noise	20mhz bw	---	65	100	mv p-p
short circuit	0.5 second max.

maximum capacitive load
models by output voltage(each output on duals)	singles	duals	units
models by output voltage(each output on duals)	220	100	uf

derating curve (3.3, 5 & ±5v outputs)

notes :

1.	specifications typical at ta=+25°c, resistive load, nominal input voltage, rated output current unless otherwise noted.
2.	these power converters require a minimum output load to maintain specified regulation.
3.	operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed.
4.	all dc/dc converters should be externally fused at the front end for protection.
5.	other input and output voltage may be available, please contact factory
6.	all specifications subject to change without notice.