Digital Phosphor Oscilloscopes TDS3032C

点击查看大图

产品价格： < 面议

产品型号：TDS3032C

品牌：tektronix

公司名称：shanghai yicetest technology co.,ltd-确定不续费了，作测试用

所在地：上海黄浦

浏览次数：274 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

300 MHz Bandwidth Models 2 Channels Sample Rates 2.5 GS/s Real-time on All Channels 10 k Standard Record Length on All Channels 3,600 wfms/s Continuous Waveform Capture Rate Suite of Advanced Triggers

产品详细信息

Characteristics

TDS3000C Series Electrical Characteristics

	TDS3012C	TDS3014C	TDS3032C	TDS3034C	TDS3052C	TDS3054C
Bandwidth	100 MHz	100 MHz	300 MHz	300 MHz	500 MHz	500 MHz
Calculated Rise Time (typical)	3.5 ns	3.5 ns	1.2 ns	1.2 ns	0.7 ns	0.7 ns
Input Channels	2	4	2	4	2	4
External Trigger Input	Included on all models
Sample Rate on each channel	1.25 GS/s	1.25 GS/s	2.5 GS/s	2.5 GS/s	5 GS/s	5 GS/s
Record Length	10 k points
Vertical Resolution	9 bits
Vertical Sensitivity, 1 MΩ	1 mV/div to 10 V/div
Vertical Sensitivity, 50 Ω	1 mV/div to 1 V/div
Input Coupling	AC, DC, GND
Input Impedance	1 MΩ in parallel with 13 pF or 50 Ω
DC Gain Accuracy	+2%
Maximum Input Voltage, 1 MΩ	150 V_RMS with peaks at < 400 V
Maximum Input Voltage, 50 Ω	5 V_RMS with peaks at < 30 V
Position Range	+ 5 div
Bandwidth Limit	20 MHz	20 MHz	20 MHz, 150 MHz	20 MHz, 150 MHz	20 MHz, 150 MHz	20 MHz, 150 MHz
Time Base Range	4 ns to 10 s	4 ns to 10 s	2 ns to 10 s	2 ns to 10 s	1 ns to 10 s	1 ns to 10 s
Time Base Accuracy	+20 ppm over any 1 ms time interval
Input/Output Interfaces
Ethernet Port	RJ-45 connector, supports 10Base-T LAN
USB Port	Front-panel USB 2.0 host port Supports USB flash drive
GPIB Port	Full talk/listen modes, setting and measurements (Optional with TDS3GV Communications Module)
RS-232-C Port	DB-9 male connector, full talk/listen modes; control of all modes, settings and measurements Baud rates up to 38,400 (Optional with TDS3GV Communications Module)
VGA Video Port	DB-15 female connector, monitor output for direct display on large VGA-equipped monitors (Optional with TDS3GV Communications Module)
External Trigger Input	BNC connector, input impedence > 1 MΩ in parallel with 17 pF; max input voltage is 150 V_RMS

Acquisition Modes
DPO	Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. DPOs provide 3 dimensions of signal information in real time: Amplitude, time and the distribution of amplitude over time.
Peak Detect	High frequency and random glitch capture. Captures glitches as narrow as 1 ns (typical) using acquisition hardware at all time base settings.
WaveAlert^®	Monitors the incoming signals on all channels and alerts the user to any waveform that deviates from the normal waveform being acquired.
Sample	Sample data only
Average	Waveform averaged, selectable from 2 to 512
Envelope	Min-max values acquired over one or more acquisitions
Single Sequence	Use the Single Sequence button to capture a single triggered acquisition sequence at a time

Trigger System
Main Trigger Modes	Auto (supports Roll Mode for 40 ms/div and slower), Normal, Single Sequence
B Trigger	Trigger after time or events
Trigger After Time Range	13.2 ns to 50 s
Trigger After Events Range	1 to 9,999,999 events

Trigger Types
Edge	Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject.
Video	Trigger on all lines or individual lines, odd/even or all fields on NTSC, PAL, SECAM
Extended Video	Trigger on specific lines in broadcast and non-broadcast (custom) standards and on analog HDTV formats (1080i, 1080p, 720p, 480p). Requires TDS3VID or TDS3SDI application module.
Pulse Width (or Glitch)	Trigger on a pulse width <, >, =, ≠ to a selectable time limit ranging from 39.6 ns to 50 s
Runt	Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again
Slew Rate	Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling or either.
Pattern	Specifies AND, OR, NAND, NOR when true or false for a specific time
State	Any logic state. Triggerable on rising or falling edge of a clock. Logic triggers can be used on combinations of 2 inputs (not 4).
Comm	Provides isolated pulse triggering required to perform DS1/DS3 telecommunications mask testing per ANSI T1.102 standard. Requires TDS3TMT application module.
Alternate	Sequentially uses each active channel as a trigger source

Waveform Measurements
Cursors	Amplitude, Time
Automatic Measurements	Display any four measurements from any combination of waveforms. Or display all measurements with measurement snapshot feature. Measurements include Period, Frequency, +Width, -Width, Rise time, Fall time, +Duty cycle, -Duty cycle, +Overshoot, High, Low, Max, Min, Peak-to-peak, Amplitude, Mean, Cycle mean, RMS, Cycle RMS, Burst width, Delay, Phase, Area¹, Cycle Area¹
Measurement Statistics	Mean, Min, Max, Standard deviation. Requires TDS3AAM application module.
Thresholds	User-definable thresholds for automatic measurements; settable in percent or voltage
Gating	Isolate a specific occurrence within an acquisition to take measurements, using either the screen or cursors

Waveform Math
Arithmetic	Add, subtract, multiply, and divide waveforms
FFT	Spectral magnitude. Set FFT vertical scale to Linear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning, or Blackman-Harris.
Advanced Math*¹	Integrate, Differentiate, Define extensive algebraic expressions including analog waveforms, math functions, scalars, up to two user-adjustable variables and results of parametric measurements. For example: (Intg (Ch1-Mean(Ch1)) x 1.414 x VAR1). Note: Requires TDS3AAM application module.

Waveform Math

Arithmetic

Add, subtract, multiply, and divide waveforms

FFT

Spectral magnitude. Set FFT vertical scale to Linear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning, or Blackman-Harris.

Advanced Math*¹

Integrate, Differentiate, Define extensive algebraic expressions including analog waveforms, math functions, scalars, up to two user-adjustable variables and results of parametric measurements. For example: (Intg (Ch1-Mean(Ch1)) x 1.414 x VAR1).

Note: Requires TDS3AAM application module.

Waveform Processing
Autoset	Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Deskew	Channel-to-channel deskew +10 ns may be manually entered for better timing measurements and more accurate math waveforms

Display Characteristics
Display Type	6.5 in. (165.1 mm) liquid crystal TFT color display
Display Resolution	640 horizontal x 480 vertical pixels (VGA)
Interpolation	Sin(x)/x
Waveform styles	Dots, vectors, variable persistence, infinite persistence
Graticules	Full, grid, cross-hair and frame. NTSC, PAL, SECAM, and vectorscope (100% and 75% color bars) with optional TDS3VID or TDS3SDI application modules
Format	YT, XY, and Gated XYZ (XY with Z-axis blanking available on 4-channel instruments only)

Power Source
AC line power
Source voltage	100 V_RMS to 240 V_RMS +10%
Source frequency	45 Hz to 440 Hz from 100 V to 120 V 45 Hz to 66 Hz from 120 V to 240 V
Power consumption	75 W maximum
Battery power	Requires TDS3BATC, rechargeable lithium ion battery pack
Operating time, typical	3 hours

Environmental and Safety
	Operating	Non-operating
Temperature	0 ºC to +50 ºC	-40 ºC to +71 ºC
Humidity	Operating and Non-operating: up to 95% RH at or below +30 ºC Operating and Non-operating: up to 45% RH +30 ºC up to +50 ºC
Altitude	To 3,000 m	15,000 m
Electromagnetic Compatibility	Meets or exceeds EN61326 Class A, Annex D radiated and conducted emissions and immunity; EN6100-3-2 AC Powerline Harmonic Emissions; EN6100-3-3 Voltage Changes, Fluctuation, and Flicker; FCC 47 CFR, Part 15, Subpart B, Class A; Australian EMC framework.
Safety	UL61010B-1, CSA1010.1, IEC61010-1, EN61010-1

Physical Characteristics
Instrument
Dimensions	mm	in.
Width	375.0	14.8
Height	176.0	6.9
Depth	149.0	5.9
Weight	kg	lbs.
Instrument only	3.2	7.0
with accessories	4.5	9.8
Instrument Shipping
Package Dimensions	mm	in.
Width	502.0	19.8
Height	375.0	14.8
Depth	369.0	14.5
Rackmount (RM3000)
Dimension	mm	in.
Width	484.0	19.0
Height	178.0	7.0
Depth	152.0	6.0

*¹ Requires TDS3AAM application module.

Ordering Information

TDS3000C Series Digital Phosphor Oscilloscopes

TDS3012C	100 MHz, 2 Channel, 1.25 GS/s
TDS3014C	100 MHz, 4 Channel, 1.25 GS/s
TDS3032C	300 MHz, 2 Channel, 2.5 GS/s
TDS3034C	300 MHz, 4 Channel, 2.5 GS/s
TDS3052C	500 MHz, 2 Channel, 5 GS/s
TDS3054C	500 MHz,.4 Channel, 5 GS/s

Standard Accessories

One P6139A, 500 MHz, 10x passive probe per channel
User Manual and Translated Front Panel Overlay	Please specify preferred language option - see chart below
Power Cord	Please specify plug option - see chart below
Accessory Tray
Protective Front Cover
OpenChoice^® PC Communication Software	Enables fast and easy communication between Windows PC and the TDS3000C series via LAN, GPIB, or RS-232. Transfer and save settings, waveforms, measurements and screen images.
NI LabVIEW SignalExpress™ Tektronix Edition LE	A fully interactive measurement software environment optimized for the TDS3000C series. Enables you to acquire, generate, analyze, compare, import and save measurement data and signals using intuitive drag-and-drop user interface that does not require any programming. Standard TDS3000C series support for acquiring, controlling, viewing and exporting your live signal data is permanently available through the software. A 30-day trial period of the full version provides additional signal processing, advance analysis, mixed signal, sweeping, limit testing and user-defined step capabilities. Order SIGEXPTE for permanent full version capability.
Traceable Certificate of Calibration	NIM/NIST
Documentation CD
3 Year Warranty	Covering all labor and parts excluding probes and accessories

Options

International Power Plugs Option
Opt. A0	North America
Opt. A1	Universal Euro
Opt. A2	United Kingdom
Opt. A3	Australia
Opt. A5	Switzerland
Opt. A6	Japan
Opt. A10	China
Opt. A11	India
Opt. A99	No power cord

Language Options Option
Opt. L0	English
Opt. L1	French
Opt. L2	Italian
Opt. L3	German
Opt. L4	Spanish
Opt. L5	Japanese
Opt. L6	Portuguese
Opt. L7	Simplified Chinese
Opt. L8	Traditional Chinese
Opt. L9	Korean
Opt. L10	Russian
Opt. L99	No manual

Recommended Accessories

Accessories
TDS3GV	GPIB, VGA, RS-232 interface
TDS3AAM	Advanced Analysis Module. Adds extended math capability, arbitrary math expressions, measurement statistics and additional automated measurements.
TDS3LIM	Limit Testing Module. Adds custom waveform limit testing capabilities.
TDS3TMT	Telecom Mask Testing Module. Adds pass/fail compliance of ITU-T G.703 and ANSI T1.102 standards, custom mask testing and more.
TDS3VID	Extended Video Analysis Module. Adds video quickmenu, autoset, hold, line count trigger, video picture mode, vectorscope*² mode, HDTV format trigger graticules and more.
TDS3SDI	Serial/Digital Video Module. Adds 601 serial digital video to analog video conversion, video picture, vectorscope*², and analog HDTV triggering capabilities and more.
TDS3BATC	Lithium ion battery pack for up to 3 hours continuous operation without line power
TDS3CHG	Fast charger for battery pack
AC3000	Soft case for carrying instrument
HCTEK4321	Hard plastic case for carrying instrument (requires AC3000)
RM3000	Rackmount kit
SIGEXPTE	NI LabVIEW SignalExpress™ Tektronix Edition Software full version
Service Manual	English only (071-2507-00)
TNGTDS01	Extensive instructions and step-by-step lab exercises provide education about the operation of TDS3000C Series Oscilloscopes. Kit includes self-paced CD-ROM based manual and signal source board. Optional hard copy manual available for order separately.

Recommended Probes

Probes
P6243	1 GHz, <1 pF input C 10X active probe
P5205	1.3 kV, 100 MHz high voltage differential probe
P5210	5.6 kV, 50 MHz high voltage differential probe
P5100	2.5 kV, 100X high voltage passive probe
TCP202	50 MHz, 15 A AC/DC current probe
TCP303^*3	15 MHz, 150 A current probe
TCP305^*3	50 MHz, 50 A current probe
TCP312^*3	100 MHz, 30 A current probe
TCPA300	100 MHz probe amplifier
TCP404XL^*4	2 MHz, 500 A current probe
TCPA400	50 MHz probe amplifier
ADA400A	100X, 10X, 1X, 0.1X high gain differential amplifier

Service Options

Options
Available at time of purchase
Opt. CA1	Provides a single calibration event or coverage for the designated calibration interval, whichever comes first
Opt. C3	Calibration Service - 3 years
Opt. C5	Calibration Service - 5 years
Opt. D1	Calibration Data Report
Opt. D3	Calibration Data Report - 3 years (with Option C3)
Opt. D5	Calibration Data Report - 5 years (with Option C5)
Opt. R5	Repair Service - 5 year
Available after purchase
TDS30xxC-CA1	Provides a single calibration event or coverage for the designated calibration interval, whichever comes first
TDS30xxC-R1PW	Repair service coverage 1 year post warranty
TDS30xxC-R2PW	Repair service coverage 2 years post warranty
TDS30xxC-R5DW	Repair service coverage 5 years (includes product warranty period); 5 year period starts at time of customer instrument purchase