DM4DL超声波测厚仪 DM4DL

点击查看大图

产品价格： < 面议

产品型号：DM4DL

品牌：其它品牌

公司名称：上海弘芯电子科技有限公司

所在地：上海闵行

浏览次数：399 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

DM4DL超声波测厚仪是在DM4超声波测厚仪的基础上增加了数据存储功能,DM4DL超声波测厚仪无需去除油漆而测量材料的净厚度,DM4DL超声波测厚仪可配标准、超厚、超薄和高温探头,DM4DL超声波测厚仪可存储5390个数据

产品详细信息

DM4DL超声波测厚仪
Krautkramer超声波测厚仪DM4系列中的DM4DL超声波测厚仪，小巧轻便，操作简单，功能**。DM4DL超声波测厚仪特有的DUAL-MULTI模式--即测量穿过涂层的操作模式，在被测物表面有油漆时，无需去除油漆而测量材料的净厚度(钢管\压力管道\锅炉壁厚的测量)。

DM4DL超声波测厚仪的特点:

可配标准、超厚、超薄和高温探头
自动探头识别、V声程校正、零位校正
带*小读数显示和存储的*小测量模式
穿过涂层测量厚度的操作模式
在不同模式的壁厚测量
极值LED报警
数据记录仪可存储5390个数据
RS232接口可接打印机和计算机

DM4DL超声波测厚仪的技术参数

测量范围
分辨率
声速
测量刷新速率
显示
存储
接口
电源
操作温度
尺寸
重量

0.6～300mm(铁)
小于99.99mm时为0.01mm；大于99.99mm时为0.1mm；
1000～9999m/s
标准4Hz，*小测量模式时为25Hz
4位LCD背光数显
5390个读数(只适用于DM4DL)
RS232接口(只适用于DM4DL)
两节5号电池，无背光时可使用200小时
-10～50℃
146x76x34mm
255g

DM4DL超声波测厚仪的常用探头技术数据

名称	型号	测量范围	频率	探头接触直径	工作温度	测量*小钢管直径	探头线型号
标准探头	DA301	1.2～200mm	5MHz	12.1mm	-20～60℃	25mm	DA231
超厚探头	DA303	5.0～300mm	2MHz	16.2mm	-20～60℃	127mm	DA231
超薄探头	DA312	0.6～50mm	10MHz	7.5mm	-20～60℃	20mm	DA235
超薄探头	DA312B16	0.7～12mm	10MHz	3.0mm	-20～60℃	15mm	自带导线
高温探头	DA305	4.0～60mm	5MHz	16.2mm	10～600℃		DA235
高温探头	HT400	1.0～254mm	5MHz	12.7mm	10～540℃	50mm	KBA535

注：所示温度为厂家理想状态试验所得，实际温度会低于此温度。注意高温耦合剂的正确使用方法。
测试高温表面时需用高温耦合剂。
DM4DL超声波测厚仪的标准配置
主机,DA301探头,DA231导线,耦合剂,两节5号电池,螺丝刀,仪器软包,中英文说明书,仪器箱

ccccccccccccc

DM4, DM4DL Thickness Gauge

The DM4 series enables you to accomplish a large number of demanding tasks, especially with remaining wall thickness measurements on components subjected to corrosion and erosion.

The DM4 and DM4DL are smart, simple-to-use ultrasonic thickness gauges that offer big ultrasonic performance in a small lightweight package. Compact size and ergonomic shape provide comfortable one-hand use.

DM4, DM4DL Thickness Gauge Products Features

Equipped with a membrane keypad and an impact-resistant, dustproof and watertight housing to guarantee long-lasting and reliable operation
Field-proven features such as Minimum Capture Mode, Differential Mode and 2-Point Calibration
Variety of application for the most different materials is made possible by the large selection of probes including intelligent dialog probes for optimized setting and improved performance.
Automatic probe zeroing for optimized gauge setting to a large number of probes and test conditions
DUAL MULTI operating mode for accurate wall thickness measurement on painted or coated pipelines and tanks. Any time-consuming and cost-intensive removal of the coating is no longer needed
Data logger for storing up to 5,000 thickness readings for later download to software for viewing, printing reports and digitally storing data.
UltraMATE software for data management (DM4-DL only)

DM4, DM4DL Thickness Gauge Applications

The DM4 instrument series are suitable for numerous test tasks on components subject to wear:

Pipelines, pressure vessels, gas cylinders, storage tanks, vessels for chemical processes
Materials handling systems, pumps
Bridges, hulls, cranes, equipment for shipbuilding and structural steel engineering

High temperature probes for temperatures up to 600°C enables you to perform thickness measurements on extremely hot components