TH1775 DC Bias Current Source TH1775

点击查看大图

产品价格： < 面议

产品型号：TH1775

品牌：TongHui

公司名称：shanghai yicetest technology co.,ltd-确定不续费了，作测试用

所在地：上海黄浦

浏览次数：327 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

TH1775 DC Bias Current Source■ Frequency response range: 1 kHz – 1 MHz ■ 0—20A current output, full-load power150 W ■ 40 A current output by 2 TH1775 paralleled■ Master and slave operation modes■ Dire

产品详细信息

Brief Introduction

TH1775 is a DC Bias Current Source (or DC Magnetization Current Source) used
for inductance measurement of inductors and transformer windings with DC bias current.
Except for constant current output, low additional error and wide frequency
response range are important for bias current inductance measurement.
High frequency LCR meter could be used, when the frequency response range is wide enough.
MPU controlled auto current balance technology is adopted to realize AC+DC current overlap
and constant current output from 0 to ±20A. Two TH1775 can be paralleled to supply a
maximum current up to 40A.TH1775 permits high frequency measurement up to 1 MHz and
can be directly controlled by TH2816A, TH2817A, TH2818 and TH2819. TH1773/TH1775 with
its low additional error, wide frequency response range and sweep output function is widely
used in DC biased inductance measurement. TH1775 also provides a perfect solution
for magnetic material analysis.

Specifications

Measurement function
Frequency response range	1kHz －1M Hz
Current output mode	Single, Multi and Equal interval current output
Scanning mode	manual, auto (negative)
Sweep points	2—15 points
Delay time	0—99 seconds set
Output current direction	Forward/reverse conversion
Impedance measurement range	ωL < 1kΩ, L<8/I (H) ，I is output current
Display	20×2 large-character LCD display with backlight
Additional error of inductance measurement	£ 1%
Warm-up time	20 minutes
Working time	continuous 24 hours
Output signal
Output current range	-20A—20A
Set current resolution	200mA range: 0.1 mA 2A range: 1 mA 20A range: 10 mA
Current accuracy	±2% of reading±3 digits
Output voltage range	0 －8 V
Others
Storage	20 sets of inner setting saved
Interface (option)	RS232C (only for connection with LCR meter) GPIB interface M/S control interface

General Specifications

Operating temperature & humidity		0 °C－40°C, £90%RH
Voltage	198V －242V
Frequency	47.5Hz －63Hz
Power consumption		≤ 350 VA
Dimensions (W×H×D)		430mm×180mm×460mm
Weight		Approx. 15kg