SA系列 105℃
特点
◆适用一高温度及信赖性较高之消费性产品。
◆高温度及信赖性较高之一般工业用产品 。
SA Series 105℃
Fearures
◆ Used in Standard size for popular circuit,etc。
◆ Available in taping configuration for automatic insertion。
技术要求 Specifications
项目ltem
特性Performance Characteristics
使用温度范围
Operating Temperature Range
-40to+105℃
-25to+105℃
额定电压范围
Rated Voltage Range
6.3to100VDC
160to450VDC
电容量范围
Capacitance Range
0.1to4700μF
0.47to220μF
电容量允差
Capacitance Tolerance
+20%（100Hz or 120Hz，+20℃）
漏电流Leakage Current
（+20℃，*大max）
I≤0.03CV或4（μA）额定工作电压充电3分钟后读数，取大者 I≤0.01CV or 3(μA)After3minutes,whichever is greater measured with rated working voltage applied
I≤0.03CV+10（μA）额定工作电压充电3分钟后读数，
取大者 I≤0.03CV+10(μA)After
3minutes,whichever is greater measured with rated working voltage applied
损耗角正切值
Dissipation Factor
（tgδ）
工作电压WorkingVoltabe(VDC)
6.3
10
16
25
35
50
63
100
160
200
250
350
400
450
D.F(%)*大
28
24
20
14
12
容量>1000μF时 ，每增加1000μF D.F值增加2%( 100Hz or 120Hz，+20℃)
For capacitance1000μF,Add 2%per another 1000μF (100Hz or 120Hz，+20℃)
低温特性
Low Temperature
Characteristics
（120Hz）
阻抗比，*大 max Impedance ratio at 120HZ to the 20℃ value
工作电压Working Voltage(VDC)
高温负荷寿命Load Life
After 1,000 hours application of rated voltage at 105℃,capacitors meet the characteristics
Meet the characteristics requirements mentioned below
环境温度:+105℃
Ambient timperature: +105℃
施加电压:额定工作电压(VDC)
Applied voltage: Rated Working Voltage(DVC)
试验后要求:室温下恢复16小时,+20℃测试
After test requirements: Resumde 16 hours at
normal temperature
电容量变化:≤25%规定值
Capacitance change:≤25% of the initial measured value
损耗角正切值:≤200%初始值
Dissipation Factor:≤200% of the initial specified value
漏电流:≤规定值
Leakage Current:≤The initial specified value
高温无负荷寿命Shelt Life
试验条件
Test conditions
持续时间:500小时
Duration time: 500hours
Ambient temperature:+105℃
施加电压:无
Applied voltage: None
After test requirements: Resumed 16 hours at
normal timperature
漏电流:≤200%规定值
Leakage Current:≤200% of the initial specified value