|
IC694ACC300
|
INPUT SIMULATOR MODULE 16 POINTS
|
|
IC694ACC310
|
RX3i Blank filler module
|
|
IC694ALG220
|
INPUT MODULE ANALOG 4 POINT VOLTAGE
|
|
IC694ALG221
|
INPUT MODULE ANALOG 4 POINT CURRENT
|
|
IC694ALG222
|
INPUT MODULE ANALOG 16 SINGLE ENDED 8 DIFFERENTIAL VOLTAGE
|
|
IC694ALG223
|
INPUT MODULE ANALOG 16 SINGLE ENDED 8 DIFFERENTIAL CURRENT
|
|
IC694ALG390
|
OUTPUT MODULE ANALOG 2 POINT VOLTAGE
|
|
IC694ALG391
|
OUTPUT MODULE ANALOG 2 POINT CURRENT
|
|
IC694ALG392
|
OUTPUT MODULE ANALOG CURRENT VOLTAGE 8 POINT
|
|
IC694ALG442
|
ANALOG COMBINATION MODULE CURRENT VOLTAGE 4 INPUT 2 OUTPUT
|
|
IC694APU300
|
HIGH SPEED COUNTER MODULE 200KHZ A B AND C TYPE
|
|
IC694APU305
|
I/O Processor high speed counter for Gray Code Encoder or A QUAD B Encoder. 30 kHz Abolute Encoder or 200 kHz A QUAD B Encoder.
|
|
IC694BEM320
|
RX3i Communication Module, I/O Link Interface Module (Slave). Module uses RX3i high speed serial bus.
|
|
IC694BEM321
|
RX3I Communication Module, I/O Link Interface Module (Master). Module is on the high speed serial bus.
|
|
IC694BEM331
|
RX3i Genius Bus Controller (supports I/O and Datagrams). Module connectsto the serial bus. Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration.
|
|
IC694CHS392
|
Base Expansion 10 Slots
|
|
IC694CHS398
|
Base Expansion 5 Slots
|
|
IC694DSM314
|
MOTION CONTROLLERMODULE 1-2 axis Digital Servo or 1-4 Axis Analog Servo
|
|
IC694DSM324
|
DSM324i 4-axis motion controller for the RX3i
|
|
IC694MDL230
|
INPUT MODULE 120 VAC 8 POINT ISOLATED
|
|
IC694MDL231
|
INPUT MODULE 240 VAC 8 POINT ISOLATED
|
|
IC694MDL240
|
INPUT MODULE 120 VAC 16 POINT
|
|
IC694MDL241
|
INPUT MODULE 24 VAC 16 POINT
|
|
IC694MDL250
|
120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers.
|
|
IC694MDL260
|
32 Point 120VAC Input Module. Requires terminal block IC694TBxx32. Compatible with RX3i only and requires firmware 3.5 and ME 5.5 or higher
|
|
IC694MDL310
|
OUTPUT MODULE 120 VAC 0.5 AMPS 12 POINT
|
|
IC694MDL330
|
OUTPUT MODULE 120/240 VAC 2AMPS 8 POINTS
|
|
IC694MDL340
|
OUTPUT MODULE 120 VAC 0.5AMPS 16 POINTS
|
|
IC694MDL350
|
120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers.
|
|
IC694MDL390
|
OUTPUT MODULE 120/240 VAC 2AMPS 5 POINT ISOLATED
|
|
IC694MDL632
|
INPUT MODULE 125 VDC 8 POINT POS/NEG LOGIC
|
|
IC694MDL634
|
INPUT MODULE 24 VDC 8 POINT POS/NEG LOGIC
|
|
IC694MDL645
|
INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC
|
|
IC694MDL646
|
INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER
|
|
IC694MDL654
|
INPUT MODULE 5/12 VDC (TTL) 32 POINT POS/NEG LOGIC
|
|
IC694MDL655
|
INPUT MODULE 24VDC 32 POINT POS/NEG LOGIC
|
|
IC694MDL660
|
RX3i 24VDC Input Module 32 point. Module is supported by serial bus andis not limited to the universal base or expansion base. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).
|
|
IC694MDL730
|
OUTPUT MODULE 12/24 VDC 2AMPS 8 POINTS POSIVIVE LOGIC
|
|
IC694MDL732
|
OUTPUT MODULE 12/24 VDC 0.5AMPS 8 POINTS POSITIVE LOGIC
|
|
IC694MDL734
|
OUTPUT MODULE 125VDC 1AMP 6 POINTS ISOLATED POS/NEG LOGIC
|
|
IC694MDL740
|
OUTPUT MODULE 12/24 VDC 0.5AMPS 16 POINTS POSITIVE LOGIC
|
|
IC694MDL741
|
OUTPUT MODULE 12/24 VDC 0.5AMP 16 POINT NEGATIVE LOGIC
|
|
IC694MDL742
|
OUTPUT MODULE 12/24 VDC 1AMP 16 POINT POSITIVE LOGIC ESCP PROTECTION
|
|
IC694MDL752
|
OUTPUT MODULE 5/24 VDC (TTL) 0.5AMP 32 POINT NEGATIVE LOGIC
|
|
IC694MDL753
|
OUTPUT MODULE 12/24 VDC 0.5AMP 32 POINT POSITIVE LOGIC
|
|
IC694MDL754
|
12/24VDC Output (0.75 amps per point)Module 32 point. The module can be used on expansion bases (uses high speed serial bus). The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).
|
|
IC694MDL930
|
OUTPUT MODULE RELAY 4AMP 8 POINT ISOLATED
|
|
IC694MDL931
|
OUTPUT MODULE RELAY 3AMP FORM B-C 8 POINT ISOLATED
|
|
IC694MDL940
|
OUTPUT MODULE RELAY 2AMP 16 POINTS
|
|
IC694PWR321
|
Power Supply 120/240 VAC 125 VDC Standard
|
|
IC694PWR330
|
Power Supply 120/240 Vac 125 Vdc High Capacity
|
|
IC694PWR331
|
Power Supply 24 Vdc High Capacity.
|
|
IC694TBB032
|
Box Style High Density Terminal Block - 36 Connections
|
|
IC694TBB132
|
36 Point Terminal Block,box style extended depth shroud. Compatible with new high density I/O modules for both RX3i and Series 90-30
|
|
IC694TBS032
|
Spring Clamp Style High Density Terminal Block - 36 Connections
|
|
IC694TBS132
|
36 Point Terminal Block,spring clamp style extended depth shroud. Compatible with new high density I/O modules for both RX3i and Series 90-30.
|
|
IC695ACC600
|
RX3i Cold Junction Compensation Kit \ for Universal Analog Input IC695ALG600
|
|
IC695ALG600
|
UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE FOR THERMOCOUPLE, RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP Terminal block ordered seperately.
|
|
IC695ALG608
|
Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current.
|
|
IC695ALG608CA
|
Conformal Coated Analog Input Module, 8 Channel voltage/current. Module does not include terminal block.
|
|
IC695ALG616
|
Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.
|
|
IC695ALG616CA
|
Conformal Coated Analog Input Module,16 channel voltage/current. Moduledoes not include terminal block.
|
|
IC695ALG626
|
Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART.
|
|
IC695ALG628
|
Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART.
|
|
IC695ALG704
|
Analog Output Module, 4 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution.
|
|
IC695ALG704CA
|
Conformal Coated Analog Output Module,4 channel voltage/current. Moduledoes not include terminal block.
|
|
IC695ALG708
|
Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution.
|
|
IC695ALG708CA
|
Conformal Coated Analog Output Module,8 channel voltage/current. Moduledoes not include terminal block.
|
|
IC695ALG728
|
Analog Output HART Module, 8 channels,that is configurable for voltage, current, current/HART configured for Current: 0 to 20mA, 4 to 20mA;
|
|
IC695CHS012
|
RX3i BASE 12 SLOTS
|
|
IC695CHS012CA
|
RX3i 12 slot universal backplane. Conformal Coated.
|
|
IC695CHS016
|
RX3i BASE 16 SLOTS
|
|
IC695CHS016CA
|
RX3i 16 universal slots backplane with conformal coating.
|
|
IC695CPU310
|
300Mhz CPU with 10Meg of memory 2 SERIAL PORTS (occupies two slots on system base)
|
|
IC695DEM001
|
RX3i Demo Case: RX3i and simulator.Demo includes CPU, power supply, input simulator, output, high speed counter,analog, digital servo and universal analog module. Simulator includes analog meter, pot, encoder and LEDs.
|
|
IC695DEM002
|
RX3i type 2 demo case. Demo includes CPU, power supply, Ethernet, inputsimulator, output, high speed counter, analog combo, Universal analog, and digital servo modules. Demo also includes QuickPanel control/view
|
|
IC695DEM003
|
RX3i type 3 demo stand. Demo includes, CPU, power supply, Ethernet, input simulator, output, high speed counter, comination analog, Universal analog, and digital servo module, QuickPanel control/View, and S2K amplifier and motor
|
|
IC695ETM001
|
Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base
|
|
IC695ETM001CA
|
RX3i Ethernet Mdl,10/100Mbits,Conformal Coated.
|
|
IC695LRE001
|
RX3i Local Expansion Module Occupies no system slots on base
|
|
IC695LRE001CA
|
RX3i Local Serial Expansion Conformal Coated.
|
|
IC695NKT001
|
RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base.
|
|
IC695PBM300
|
RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). The module supports PROFIBUS V1 Master functionality. The PROFIBUS Master module requires an RX3i CPU with firmware version 2.9 or later
|
|
IC695PBS301
|
Profibus Slave module that supports V1 functionality. The Profibus Slave module utilizes the RX3i PCI bus and will only work on the RX3i Universal base.
|
|
IC695PSA040
|
RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on system base
|
|
IC695PSA040CA
|
RX3i AC Power Supply, 40 Watt Conformal Coated
|
|
IC695PSA140
|
120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application.
|
|
IC695PSD040
|
Power supply 24VDC 40 watts occupies one slot on system base
|
|
IC695PSD040CA
|
RX3i 24VDC Power Supply, 40 Watt Conformal Coated.
|
|
IC695PSD140
|
24VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane.
|
|
IC695STK001
|
RX3i Power PACkage 1 Starter Kit includes RX3i with software. (includesRX3i with software. (includes one each IC695CPU310, IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.)
|
|
IC695STK002
|
Includes RX3i and QuickPanel View 6 inch STD with software (one each IC695CPU310/ IC695CHS012/ IC69 5LRE001/ IC695PSA040/ IC695ETM001/ IC694ACC300/ IC694MDL940/ IC754VSI06STD/ BC646MQP001/ IC646MPP001 and DC power)
|
|
IC695STK003
|
RX3i Power PACkage 3 Starter Kit includes RX3i/ motion module (Servo andAmplifier sold seperately) and QuickPanel View 6 inch STD wi th software
|