Specifications
Measurement function
Measurement parameters
Cs, Cp, Rs, Rp, |Z|,D, Q
Basic accuracy
0.1%
Equivalent circuit
Series, Parallel
Mathematical function
ΔABS, Δ%
Range mode
Auto, Hold, Manual
Trigger mode
Internal, Manual, External, BUS
Minimum measurement time
13ms (@1kHz)
15ms (@100Hz,120Hz)
Average times
1 - 255
Calibration function
Open/Short/Load correction
Measurement terminal
5-terminal
Display mode
Direct, ΔABS, Δ%, V/I (V/I monitor), Bin No., Bin counter
Display
240×64 dot-matrix LCD display with 5-digit resolution
Measurement signal
Signal frequency
3 points: 100Hz,120Hz,1kHz
Output impedance
25Ω, 50Ω, 100Ω, 25Ω/100Ω, C.V. (constant voltage)
Test level
10mVrms - 1.0Vrms, with step of 1mV
Constant voltage range
100Hz ≤300μF
120Hz ≤250μF
1kHz ≤30μF
Measurement display range
R
0.0001Ω - 99.999MΩ
G
0.0001μS - 999.99S
C
0.001pF - 1.9999F
D
0.0001 - 9.9999
Q
0.0001 - 99999
Δ%
-99.999% - 999.999%
Comparator and interface
Comparator
10 bins: 8 PASS bins, 1 FAIL bin, 1 AUX bin
HIGH/PASS/LOW comparator
Memory
12 sets of instrument settings saved and loaded
Interface
RS-232C, HANDLER, GPIB (option)
Note1: Fast measurement time includes A/D, calculation, main/sub parameter comparison
judgment, and small-character display of measurement parameter. If measurement parameter
is displayed in large character, the fastest measurement time will be added by another 5ms.
General Specifications
Ordering Information
TH2619 High-speed Capacitance Meter
Instrument Accessories
TH26005 4-terminal test fixture
TH26011 4-terminal Kelvin test cable
TH26010 gilded shorting plate
Options
TH26001 4-terminal test fixture
TH26005-2 4-terminal test fixture
TH26006 axial component test fixture (used with TH26005)
TH26008 SMD component test fixture
TH26009 SMD component test tweezers
TH26029A SMD component test tweezers
TH26004-1 4-terminal Kelvin test cable
TH10001 GPIB interface board