2A级2级小型信号切换用的

• 国际标准继电器
• 长端子形状，焊接部分的长期连接可靠性提高。（表面安装端子型）
• 内部为L形端子形状，可进行高密度封装。（表面安装端子型）
• 利用独特的焊接部端子构造，在IRS封装时，端子温度上升快，确保良好的焊接性。（表面安装端子型）
• 线圈接点间耐高压2,000V AC、高度耐冲击电压2,500V 2×10μs（Telcordia标准）。
• 高9.4mm×宽7.5mm×长15mm的小型尺寸。
• 还有BSI(EN60950)附加绝缘认证型产品可选。（-Y型）
• Surface mounting terminal standard models

  Enclosure rating	Relay Function	Single-side stable		Single-winding latching		Double-winding latching		Minimum packing unit
  	Contact form	Model	Rated coil voltage	Model	Rated coil voltage	Model	Rated coil voltage
  Fully sealed	DPDT (2c)	G6S-2F G6S-2G	3 VDC	G6SU-2F G6SU-2G	3 VDC	G6SK-2F G6SK-2G	3 VDC	50 pcs/tube (400 pcs/reel)
  			4.5 VDC		4.5 VDC		4.5 VDC
  			5 VDC		5 VDC		5 VDC
  			12 VDC		12 VDC		12 VDC
  			24 VDC		24 VDC		24 VDC
  		G6S-2F-Y G6S-2G-Y	5 VDC	G6SU-2F-Y G6SU-2G-Y	5 VDC	−	−
  			12 VDC		12 VDC
  			24 VDC		24 VDC

  
  

  Note:	1.	When ordering, add the rated coil voltage to the model number.
  		Example: G6S-2F
  		However, the notation of the coil voltage on the product case as well as on the packing will be marked as □□ VDC.
  	2.	When ordering tape packing, add -TR" to the model number. Be sure since -TR" is not part of the relay model number, it is not marked on the relay case.
  	3.	When ordering tape packing, minimum order unit is 2 reels (400pcs × 2 = 800 pcs).

  
  ●PCB Terminal Standard Models

  Enclosure rating	Relay Function	Single-side stable		Single-winding latching		Double-winding latching		Minimum packing unit
  	Contact form	Model	Rated coil voltage	Model	Rated coil voltage	Model	Rated coil voltage
  Fully sealed	DPDT (2c)	G6S-2	3 VDC	G6SU-2	3 VDC	G6SK-2	3 VDC	50 pcs/tube
  			4.5 VDC		4.5 VDC		4.5 VDC
  			5 VDC		5 VDC		5 VDC
  			12 VDC		12 VDC		12 VDC
  			24 VDC		24 VDC		24 VDC
  		G6S-2-Y	5 VDC	G6SU-2-Y	5 VDC	−	−
  			12 VDC		12 VDC
  			24 VDC		24 VDC

  
  

  Note:	When ordering, add the rated coil voltage to the model number.
  	Example: G6S-2
  	However, the notation of the coil voltage on the product case as well as on the packing will be marked as □□ VDC.

  Single-side Stable
  G6S-2, G6S-2-Y
  Tolerance of ±0.3mm
  

  PCB Mounting Holes (Bottom View)	Terminal Arrangement/ Internal Connections (Bottom View) Note: Check carefully the coil polarity of the Relay.

  
  

  G6S-2F, G6S-2F-Y Tolerance of ±0.3mm
  Mounting Dimensions (Top View) Tolerance:±0.1mm	Terminal Arrangement/ Internal Connections (Top View) Note: Check carefully the coil polarity of the Relay.

  
  

  G6S-2G , G6S-2G-Y Tolerance of ±0.3mm
  Mounting Dimensions (Top View) Tolerance:±0.1mm	Terminal Arrangement/ Internal Connections (Top View) Note: Check carefully the coil polarity of the Relay.

  
  

  Single-winding Latching G6SU-2 Tolerance of ±0.3mm
  PCB Mounting Holes (Bottom View)	Terminal Arrangement/ Internal Connections (Bottom View) Note: Check carefully the coil polarity of the Relay.

  
  

  G6SU-2F Tolerance of ±0.3mm
  Mounting Dimensions (Top View) Tolerance:±0.1mm	Terminal Arrangement/ Internal Connections (Top View) Note: Check carefully the coil polarity of the Relay.

  
  

  G6SU-2G Tolerance of ±0.3mm
  Mounting Dimensions (Top View) Tolerance:±0.1mm	Terminal Arrangement/ Internal Connections (Top View) Note: Check carefully the coil polarity of the Relay.

  
  

  Double-winding Latching G6SK-2 Tolerance of ±0.3mm
  PCB Mounting Holes (Bottom View)	Terminal Arrangement/ Internal Connections (Bottom View) Note: Check carefully the coil polarity of the Relay.

  
  

  G6SK-2F Tolerance of ±0.3mm
  Mounting Dimensions (TOP View) Tolerance:±0.1mm	Terminal Arrangement/ Internal Connections (TOP View) Note: Check carefully the coil polarity of the Relay.

  
  

  G6SK-2G Tolerance of ±0.3mm
  Mounting Dimensions (TOP View) Tolerance:±0.1mm	Terminal Arrangement/ Internal Connections (TOP View) Note: Check carefully the coil polarity of the Relay.

  ---

  Coil Ratings
  Single-side Stable Type (G6S-2, G6S-2F, G6S-2G)

  Rated voltage	3 VDC	4.5 VDC	5 VDC	12 VDC	24 VDC
  Rated current	46.7 mA	31.0 mA	28.1 mA	11.7 mA	8.3 mA
  Coil resistance	64.3 Ω	145 Ω	178 Ω	1,028 Ω	2,880 Ω
  Must operate voltage	75% max. of rated voltage
  Must release voltage	10% min. of rated voltage
  Max. voltage	200% of rated voltage at 23ºC,130% at 85ºC				170% of rated voltage at 23ºC,130% at 85ºC
  Power consumption	Approx. 140 mW				Approx. 200 mW

  Note:	1.	The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
  	2.	Operating characteristics are measured at a coil temperature of 23ºC.
  	3.	The maximum voltage is the highest voltage that can be imposed on the relay coil.

  
  Single-side Stable Type (G6S-2-Y, G6S-2F-Y, G6S-2G-Y)

  Rated voltage	5 VDC	12 VDC	24 VDC
  Rated current	40 mA	16.7 mA	9.6 mA
  Coil resistance	125 Ω	720 Ω	2,504 Ω
  Must operate voltage	75% max. of rated voltage
  Must release voltage	10% min. of rated voltage
  Max. voltage	170% (at 23°C)
  Power consumption	Approx. 200 mW		Approx. 230 mW

  Note:	1.	The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
  	2.	Operating characteristics are measured at a coil temperature of 23ºC.
  	3.	The maximum voltage is the highest voltage that can be imposed on the relay coil.

  
  

  Single-winding Latching Type (G6SU-2, G6SU-2F, G6SU-2G) Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 33.3 mA 22.2 mA 20 mA 8.3 mA 6.3 mA Coil resistance 90 Ω 203 Ω 250 Ω 1,440 Ω 3,840 Ω Must set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltage Max. voltage 180% of rated voltage at 23ºC 140% at 85ºC Power consumption Approx. 100 mW Approx. 150 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%. 2. Operating characteristics are measured at a coil temperature of 23ºC. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. Single-winding Latching Type (G6SU-2-Y G6SU-2F-Y G6SU-2G-Y) Rated voltage 5 VDC 12 VDC 24 VDC Rated current 28.1 mA 16.7 mA 5.8 mA Coil resistance 178 Ω 720 Ω 4,114 Ω Must operate voltage 75% max. of rated voltage Must release voltage 75% max. of rated voltage Max. voltage 200% (at 23°C) Power consumption Approx. 140 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%. 2. Operating characteristics are measured at a coil temperature of 23ºC. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

  
  

  Double-winding Latching Type (G6SK-2, G6SK-2F, G6SK-2G) Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 66.6 mA 44.4 mA 40 mA 16.7 mA 12.5 mA Coil resistance 45 Ω 101 Ω 125 Ω 720 Ω 1,920 Ω Must set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltage Max. voltage 170% of rated voltage at 23ºC, 130% at 85ºC 140% of rated voltage at 23ºC, 110% at 70ºC Power consumption Approx. 200 mW Approx. 300 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%. 2. Operating characteristics are measured at a coil temperature of 23ºC. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

  EN60950 certified Model (G6S-2F-Y, G6S-2G-Y, G6S-2-Y) Rated voltage 5 VDC 12 VDC 24 VDC Rated current 40 mA 16.7 mA 9.6 mA Coil resistance 125 Ω 720 Ω 2,504 Ω Must operate voltage 75% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 170% of rated voltage at 23ºC, 130% at 85ºC 170% of rated voltage at 23ºC, 110% at 70ºC Power consumption Approx. 200 mW Approx. 230 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%. 2. Operating characteristics are measured at a coil temperature of 23ºC. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

  Contact Ratings Item Load Resistive load Contact type Bifurcated crossbar Contact material Ag (Au-clad) Rated load 0.5 A at 125 VAC; 2 A at 30 VDC Rated carry current 2A Max. switching voltage 250 VAC, 220 VDC Max. switching current 2A

  Characteristics Relay Function Item Single-side stable models Single-winding latching models Double-winding Latching EN60950 certified EN60950 certified G6S-2, G6S-2F, G6S-2G G6SU-2, G6SU-2F, G6SU-2G G6SK-2, G6SK-2F, G6SK-2G G6S-2F-Y, G6S-2G-Y, G6S-2-Y G6SU-2-Y, G6SU-2F-Y, G6SU-2G-Y Contact resistance *1 75 mΩ max. Operating (set) time 4 ms max. Release (reset) time 4 ms max. Min. set/reset pulse width --- 10 ms --- 10 ms Insulation resistance *2 100 M Ω min. (at 500 VDC) Dielectric strength Between coil and contacts 2,000 VAC, 50/60 Hz for 1 min 1,000 VAC, 50/60 Hz for 1 min 2,000 VAC, 50/60 Hz for 1 min Between contacts of different polarity 1,500 VAC, 50/60 Hz for 1 min Between contacts of the same polarity 1,000 VAC, 50/60 Hz for 1 min Between set and reset coil --- 500 VAC, 50/60 Hz for 1 min --- Impulse withstand voltage Between coil and contacts 2,500 V (2 × 10 νs); 1,500 V (10 × 160 νs) 1,500 V (10 × 160 νs) 2,500 V (2 × 10 νs); 1,500 V (10 × 160 νs) Between contacts of different polarity 2,500 V (2 × 10 νs); 1,500 V (10 × 160 νs) Between contacts of the same polarity 1,500 V (10 × 160 νs) Vibration resistance Destruction 10 to 55 to 10 Hz, 2.5 mm single amplitude (5 mm double amplitude) Malfunction 10 to 55 to 10 Hz, 1.65 mm single amplitude (3.3 mm double amplitude) Shock resistance Destruction 1,000 m/s2 Malfunction 750 m/s2 Durability Mechanical 100,000,000 operations min. (at 36,000 operations/hr) Electrical 100,000 operations min. for AC (at 1,800 operations/h with rated load) 100,000 operations min. for DC (at 1,200 operations/h with rated load) Failure rate (P level) (reference value) *3 10 νA at 10 m VDC Ambient operating temperature -40°C to 85°C (with no icing or condensation), and -40°C to 70°C (with no icing or condensation) only for double-winding latching 24 VDC type and EN60950 standard approved 24 VDC type Ambient operating humidity 5% to 85% Weight Approx. 2 g

  Note:		The above values are initial values.
  	1.	The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
  	2.	The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength (except between the set and reset coil).
  	3.	This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50Ω. This value may vary, depending on switching frequency, operating conditions, expected reliability level of the relay, etc. It is always recommended to double-check relay suitability under actual load conditions.