首页 >>> 技术文章 >

技术文章

LHB04电子手轮 手脉 手摇脉冲发生器 雕刻机手轮说明书

雕刻机电子手轮 手脉 手摇脉冲发生器LHB04说明书

The Manual For  Fully functional Handle for Engraving machine
Model：LHB04

版本号（Version）：  V1.0                     


一.外观结构说明 （Structure  Description）

二.直流电气特性（DC Description） 

产品名称
Name

工作电压
 Voltage 

工作电流
Current 

备注
Note

电子手轮

 4.5V—5.0V 

小于 100mA
Less than 50mA

  
三. LHB04手轮使用说明      
Operating Instructions of  LHB04 
 LHB04手轮驱动安装
 LHB04 SET UP 
1. 安装了MACH3后,在MACH3安装目录下有个 “PlugIns” 文件夹,如果没有请建一个名为”PlugIns”的文件夹.然后把驱动文件XHC-ShuttlePro.dll拷贝到此文件夹\Mach3\PlugIns下.
  When Mach3 is installed , there will be a folder created named “PlugIns” in the Mach3 folder. This folder is the location to put and Plugin files that you want Mach3 to know about. Place“XHC-ShuttlePro.dll” in the \Mach3\PlugIns folder. Check and make sure it is there.
2. 插入MACH3 手轮的usb控制器到计算机的usb口.**次时,计算机会提示发现新硬件,并自动安装控制器需要的驱动.
 Now that the XHC-ShuttlePro.dll file is in \Mach3\PlugIns, the next step is to connect the ShuttlePro. If you are certain that your ShuttlePro is working and your hardware is working then you can simply plug in the ShuttlePro to   one of  the USB ports.
3. 打开mach3软件,在“Config”配置菜单下,选择”Config Plugins”配置插件.在弹出的配置插件窗口中,将” ShuttlePro-XHC-FOR-MACH3…”enable使能,这时会看到到有绿色的钩.然后点黄色的”config”配置按钮,会弹出键的配置窗口,在配置窗口中,你可以选择每个按键的功能.如果不选择,全部的按键将是默认功能.  
Once the ShuttlePro is connected, start Mach3 and go to the “Config” menu choice and select “ConfigPlugins”. You should see the ShuttlePro choice with a green checkmark in front of it. If it is not checked, you can check it. The checkmark means that Mach3 found the ShuttlePro on startup. Click the“CONFIG” in yellow and set the buttons as you wish.
4. 退出配置窗口后, MACH3 手轮就能正常使用了.在mach3软件使用前,你需要按”Reset”复位键,mach3软件才能正常使用.
Once you have the proper button selected in the Mach3 ShuttlePro Plugin CONFIG menu, your Shuttle device should be working properly.
四. 使用功能描述（Features Description）

A．按键功能描述（Button Features Description）

 

B．窗口显示描述（LCD Display Features Description）         
    坐标值显示窗口：（Coordinates of the window）

 C.   按键功能列表（Key function description）

对应图标
Corresponding  icon		 名称
Name		  按键功能描述
Key function description
   停止按钮
Stop button 		 按下该键，停止机床
Press the button to stop machine
  开始/暂停按钮
Start / Pause button 		 机床处于运行状态，按下该键，机床暂停加工机床处于暂停状态，按下该键，机床继续运行
Machine is running, press the button, the machine to suspend processing,Machine is paused, press this button, the machine continues to run
  倒退
 Rewind 		 返回到程序的开始
return to the program start
  复位
Reset 		 复位程序
 reset program
  回工件原点按钮
Back to the origin Button 		 按下该键，机床执行回工件原点操作
Press this key piece back to the origin of the implementation machine
  X分中按钮
X Coordinates 1 / 2 Button 		 将X工件坐标分中 
X Coordinates 1 / 2
  Y分中按钮
Y Coordinates 1 / 2 Button 		 将Y工件坐标分中 
Y Coordinates 1 / 2
  Z**高度设定 
Z Coordinates 1 / 2 Button		 将当前Z轴的工件坐标做为Z轴的退刀点
Z Coordinates 1 / 2
  X=0按钮
X oordinates=0 Button		 将当前坐标设置为X轴工件坐标
X coordinate is set to the current Workpiece coordinates axis
   Y=0按钮
Y oordinates=0 Button		  将当前坐标设置为Y轴工件坐标
Y coordinate is set to the current Workpiece coordinates axis

……                                                                                                     详情请点击下载 


成都新宏畅无线科技有限公司
Chengdu XingHongChang Wireless Technology Co., Ltd

www.cdxhctech.com

上一篇：LHB03雕刻机电子手轮(手摇脉冲发生器 手脉 维宏数控系统）说明书
下一篇：无线手轮-脉冲发生器-手脉稳定性说明