EP6000系列电气阀门定位器 EP6000系列电气阀门定位器
产品简介
EP6000系列电气阀门定位器与调节阀门配套使用,输入4—20mADC的信号转换输出空气压力,控制执行机构的动作。同时根据执行的行程进行反馈,从而使执行机构的行程能按控制信号进行*定位。EP6000系列电气阀门定位器用于单动作型和双动作型执行机构。
产品详细信息
EP6000系列电气阀门定位器
| |||||||||||||
|
系 列 Series |
6 |
0 |
0 |
0 |
|
| |
防爆(防护)结构 Ex.enclosure |
1 2 3 |
|
|
|
耐压防爆型(隔爆型)d ExdlllBT6 Explosion proof type | ||
|
|
室外防水型(增安型)e ExellT6、lP55 Weather proof type | |||||
|
|
本质**型(本安型)I ExiallCT6 Intrinsically safe explosion proof type | |||||
反馈(动作)方式 Feedback style |
1 2 |
|
|
直行程执行机构用:标准型Linear:Feedback for standard lever | |||
|
角行程(直连式回转轴)执行机构用:标准型Rotary:Feedback for lever | ||||||
作用型式Action type |
1 2 |
|
单动作型执行机构用(单作用)For single acting type | ||||
|
双动作型执行机构用(双作用)For double acting type | ||||||
辅件Accessories |
AS |
带关联匹配 气压控制器Matched decompressor valve | |||||
例:Example:
EP 6111: 表示 隔爆型、直行程、单作用、电气阀门定位器。
EP 6311: 表示 本安型、直行程、单作用、电气阀门定位器。
EP 6122: 表示 隔爆型、角行程、双作用、电气阀门定位器。
EP 6322: 表示 本安型、角行程、双作用、电气阀门定位器。
EP 6112: 表示 隔爆型、直行程、双作用、电气阀门定位器。
EP 6312: 表示 本安型、直行程、双作用、电气阀门定位器。
EP 6211: 表示 增安型、直行程、单作用、电气阀门定位器。
EP 6111-AS:表示 隔爆型、直行程、单作用、电气阀门定位器带关联匹配组合 气压控制器。
注:耐压防爆型(隔爆型)的使用环境温度范围为-20~+80℃。
本质**型(本安型)的使用环境温度范围为-40~+60℃。
In the case of explosion proof type,temperature range is -20~+80℃.
In the case of intrinsically safe explosion proof type,temperature range is -40~+60℃.
2-2.技术参数 2-2.TECHNICAL DATA
系 列 Series |
EP 6000 |
输入信号 Input signal |
4~20mA DC The split range is possible by span 可进行分程控制 adjustment and zero adjustment 调整范围:4~12、12~20mA DC Adjustment range:4~12、12~20mA DC |
输入阻抗Input impedance |
250Ω±5%at25℃ |
输出特性Output Characteristic |
线性(标准型) Linear(standard) |
放大器 Relay |
单动作型执行机构和双动作型执行机构兼用,Non-bleeding type. 单动作正作用型放大器易变换成反作用型放 Single acting and double acting types 大器(输入信号增加,输出气压相应减小) are available. |
气源压力 Air supply |
0.14~0.7MPa(140~700KPa) |
输出压力 Output pressure |
0~0.7 MPa(0~700KPa) |
耗气量 Air consumption |
输出气压50%时的耗气量。 At output air pressure 50% 单动作型 Single acting type:5NI/min at 140 kpa air supply 双动作型 Double acting type:15NI/min at 400kpa air supply |
*处理容量Max.capacity |
输出侧气源放空时 Capacity when output is atmospheric venting. 单动作型 Single acting type:175NI/min at 140kpa air supply 双动作型 Double acting type:400NI/min at 400kpa air supply |
性 能Performance |
单动作型执行机构 For single acting actuator 直 线 性 Linearity∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙±1.0%of Full stroke 滞 后 Hysteresis∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙0.5%of Full stroke 灵 敏 度 Response level∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙0.1% of Full stroke 重 复 精 度 Repeatability∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙0.2% of Full stroke 气源压力变动误差 Supply pressure effect∙∙∙∙∙∙∙∙∙∙∙0.1%10Kpa 双动作型执行机构 For double acting actuator 直 线 性 Linearity∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙±1.5% of Full stroke 滞 后 Hysteresis∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙0.8% of Full stroke 灵 敏 度 Response level∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙0.2% of Full stroke 重 复 精 度 Repeatability∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙0.3% of Full stroke 气源压力变动误差 Supply pressure effect∙∙∙∙∙∙∙∙∙∙∙0.4%10Kpa 上述各数值是指在不连接阀门的情况下执行机构的性能。 The above data represent the performance of the positioner on an actuator without a valve. |
气源接口 Air connection |
Rc 1/4 NPT1/4 |
电气接口 Wiring connection |
G 1/2 NPT1/2 |
环境温度Ambient temperature |
标准型 Standard type -20~+80℃ |
湿度范围Ambient humidity range |
10~90%RH |
结构形式Enclosure |
耐压防爆型(隔爆型)d Ex dllBT6、Explosion proof type(Ex d ll BT6) 室外防水型(增安型)e Ex ellT6、lp55、lp65 Waterproof type(Ex ellT6、lp55、lp65) 本质**型(本安型)I Ex iallCT6 Intrinsically safe explosion proof type(Ex iall CT6) |
附属机构Standard auxiliary |
自动-手动切换装置Auto-Manual switch |
外壳材料 Housing material |
铝合金Aluminum alloy |
表面涂层 Coating |
喷塑Spray plastics |
标准涂层色 Coating colors |
宝蓝色 Blue 浅灰Light gray 黑色Black |
重 量 Approx.weight |
2.3kg~3kg |
|
|
附加规格Optionalspecifications |
根据客户要求制作Available upon request |
电气接口 Wiring connection |
1/2NPT(室外防水型For waterproof only) 耐压填料式Packing cable gland(耐压防爆型For explosion proof only) 密封接头式Sealing fitting(耐压防爆型For explosion proof only) |
**栅Safety device |
齐纳**栅Zener barrier(Exia ll C) |
压力表刻度Pressure gauge |
Mpa、Kpa、Bar、Psi |
输出特性Output characteristic |
等百分比Equal percentage |
气源接口Air supply connection |
1/4NPT |